Which Is The Best Benner Nawman Rebar Cutter Today?

There are lots of different kinds of cutters out there for all sorts of different needs. While each can be the best cutter for a particular task, you need to make sure that you’re getting the one that matches your needs. But first, let’s talk about what a benner nawman rebar cutter actually is.

The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.

Today, we have for you a selection of the best benner nawman rebar cutter tools that you can buy this year. And to make sure that you settle on just the right device, we’ve even included a handy buyers’ guide at the end.

List of 10 Best benner nawman rebar cutter: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the benner nawman rebar cutter to grab the best one.

1. benner nawman dc-20wh portable heavy-duty rebar cutter

Features :

  • Maximum Cutting Diameter: 3/4″ #6 Rebar (19mm) Grade 60
  • Cuts per battery /Cutting speed: 3 Seconds
  • Voltage/Amperage: 115V 50/60Hz / 10 amps
  • Tool Weight: 25.4 lbs (11.5 kg)
  • Dimensions L x W x H:16″ (410mm) x 4.3″ (110mm) x 8.2″ (210mm)

Additional Info :

Item Dimensions
Height 35
Width 38
Length 48
Weight 0

2. VEVOR 1.5 KW Electric Rebar Bender, 1”(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

Features :

  • 0 – 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4” to 1″ (6 to 25 mm) within 5 seconds. 1/4” / 6 mm #2 Rebar(0-55°), 1” / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands.
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine’s operating life to a large extent.
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing.
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position.
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.

Additional Info :

Item Dimensions
Height 8.3
Width 6.6
Length 20.7
Weight 49

3. BN Products MBC-16B 1 Manual Bender/Cutter, Orange

Features :

  • Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar
  • Adjustable 2-1/2″ diameter bending roller
  • Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws
  • Other features include a 12″ long no-slip handle grip and a lifting chain to make it easier to carry
  • Other features include a 12″ long no-slip handle grip and a lifting chain to make it easier to carry

Additional Info :

Color Orange
Item Dimensions
Height 10
Width 8
Length 61
Weight 55

4. Makita XEC01PT1 18V X2 (36V) LXT® Lithium-Ion Brushless Cordless 9″ Power Cutter Kit, with AFT®, Electric Brake, 4 Batteries (5.0 Ah)

Features :

  • Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
  • The BL Brushless Motor powered by two 18V LXT Lithium-Ion batteries eliminate the hassle of engine pull starts allowing immediate starts-up
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life; delivers 6,600 RPM
  • Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
  • Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop

Additional Info :

Item Dimensions
Height 12.13
Width 26.02
Length 13.98
Weight 28.19

5. BN Products BNCE-20 Cutting Edge Saw, Orange, L

Features :

  • The Cutting Edge Saw has a unique flush-cutting blade guard that greatly reduces blade exposure.
  • It also has a double insulated power harness and is ETL Certified and Listed
  • This compact and lightweight tool has a 3-position removable side and a rotating trigger handle.
  • That provides the operator with multiple cutting positions and increased maneuverability in tight areas.

Additional Info :

Color Orange
Item Dimensions
Height 3.9
Width 5.5
Length 20.3
Weight 13.3

6. XtremepowerUS 3200W 16″ in Electric Cutter Circular Saw Wet/Dry Concrete Saw Cutter Guide Roller

Features :

  • The Circular Saw Is Lightweight And Powerful Machine With Superior Power-To-Weight Ratio With Exceptionally Low Vibrations Mean Less Strain And Maximized Productivity
  • The Double Protection Switch Prevents The Machine From Accidentally Opening, Promises A Safer Cutting Job. Water Line Feeds Water To The Blade Decreasing Dust And Increasing Blade Performance And Life
  • Powerful 3200W Motor That Delivers The Power To Cut Through Granite, Porcelain, Concrete And Other Stone Materials With Ease
  • Extraction Dust Port Can Vent The Cutting Debris Timely, Help You Clear The Cutting Surface, For You To Keep The Cutting Line Free Of Dust All The Time, And Also Give You A Clear View Of The Cutting Line. With The Metal Guard Design To Prevent The Hurt From Spark When Operating

Additional Info :

Item Dimensions
Height 18.5
Width 8.5
Length 32
Weight 40

7. CCTI Portable Rebar Cutter – Electric Hydraulic Cut Up to #7 7/8″ Rebar and Round Bar(Model: RC-227C)

Features :

  • Portable and Heavy Duty 33 LB Net
  • Cut Up to #7 7/8″(22mm) Grade 60 Rebar and Round Bar
  • Fast Speed 4.5 Seconds Cutting
  • Power by 110V AC – 1350W
  • Includes: Cutter, Steel Carry Case, Wrench Set, Hydraulic Oil, User Manual

Additional Info :

Color Red

8. Evolution R300DCT – 12 in Concrete Saw (Aka Circular Saw, Angle Grinder, Chop Saw, Cut Off Saw, Demo Saw, Disc Cutter, Power Cutter) – 15A Motor, No Gas – 4-1/2 in Cut – Incl Diamond Masonry Blade

Features :

  • Huge 4-1/2” cut depth
  • Powerful 15A Electric Motor. No pull chords, no fuel & no servicing!
  • Steel wrap-around front handle with rubber grip
  • Adjustable blade guard with one handed operation
  • 12” diamond blade included
  • 10ft heavy-duty rubber cable
  • Reversible flange for 20mm or 22.2mm bore blades

Additional Info :

Item Dimensions
Height 10.6299
Width 15.748
Length 30.7086
Weight 21.384839414

9. CCTI Portable Rebar Cutter – Electric Hydraulic Cut Up to #6 3/4″ Rebar and Round Bar(Model: RC-196C)

Features :

  • Portable and Light Weight 29 LB Net.
  • Cut Up to #6 3/4″(20mm) Grade 60 Rebar and Round Bar
  • Fast Speed 3.5 Seconds Cutting
  • Power by 110V AC – 1250W
  • Includes: Cutter, Steel Carry Case, Wrench Set, Hydraulic Oil, User Manual

Additional Info :

Color Red

10. Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8″ 16mm #5 Rebar within 3 Seconds, 110V

Features :

  • Pure Copper Coil Motor: This electric rebar cutter features a 900W pure copper coils motor to ensure higher reliability, which means excellent motivation yet low noise. The motor runs more smoothly to achieve the minimum friction and the minimum power consumption.
  • Super-Fast Cutting Speed: The hydraulic rebar cutter can cut rebar within 2.5-3.0 seconds without sparks and sentiments, which can satisfy your various cutting demand. Cutting capacity ranges from 3/20″ (4mm) #3 Min. Rebar to 5/8″ (16mm) #5 Max. Rebar.
  • High-quality Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed heads can offer quick and accurate cutting while providing double stability and sealability.
  • Adjustable Bolt Design: This hydraulic cutter comes with an adjustable bolt-on to make it convenient when cutting rebar of various sizes. The rebar cutting machine we designed has low noise and a low failure rate, which is very helpful for work.
  • Easy Storage & Widely Used: We provide you with a high-quality protective box for better storage. The compact body makes it effortless to carry anywhere. This electric rebar cutter is mainly used in construction sites, factory workshops, railway construction, bridge construction, building house, roads, etc.

Additional Info :

Color Rebar Cutter 5/8″(16mm)
Item Dimensions
Height 5.5
Width 8.2
Length 19.5

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of benner nawman rebar cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 benner nawman dc-20wh portable heavy-duty rebar cutter
9.2
9.7
8.9
2 Benner Nawman BNRC-25X Rebar Cutter Cutting Block Set (Aftermarket Part)
9.4
8.9
9.4
3 Benner Nawman BRNC-20WH Rebar Cutter Cutting Block Set (Aftermarket Part)
9.8
9.6
9.4
4 Cordless Rebar Cutter,Battery Included
8.9
9.4
9
5 DC-25X Rebar Cutter Tune-Up Kit
9.6
8.9
9
6 Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8" 16mm #5 Rebar within...
8.8
9.3
9.3
7 Portable Electric #5 Rebar Cutter w/ D-Handle Grip
9.8
9.4
9.3
8 NEWTRY Rebar Tie Automatic Rebar Tier Gun 4400 MAh Steel Tying Machine 8-34mm Bar Tie Tool...
9.7
9.3
9.4
9 Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8", 1/2", 5/8") |...
8.8
9.7
9.7
10 WORX WX081L 4V ZipSnip Cordless Electric Scissors
9.1
9.4
9.2

 

What to Consider When Choosing the Best benner nawman rebar cutter

The Best benner nawman rebar cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual benner nawman rebar cutterare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“benner nawman rebar cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

benner nawman rebar cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual benner nawman rebar cutter.

benner nawman rebar cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals benner nawman rebar cutter. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual benner nawman rebar cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best benner nawman rebar cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace benner nawman rebar cutter Blade?

Nearly every warehouse has a cutter, often known as a benner nawman rebar cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

benner nawman rebar cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The benner nawman rebar cutter

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our benner nawman rebar cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the benner nawman rebar cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The benner nawman rebar cutter Back Together

We should now begin putting the benner nawman rebar cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your benner nawman rebar cutter will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the benner nawman rebar cutter to ensure that it is at a comfortable resistance.

3 Features of a benner nawman rebar cutter

The following characteristics are necessary for a heavy-duty benner nawman rebar cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because benner nawman rebar cutter with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your benner nawman rebar cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a benner nawman rebar cutter with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment