10 Best Cheap Plasma Cutter -According To Experts

Best cheap plasma cutter can make any work easier, especially when dealing with a lot of cutting. Best cheap plasma cutter can be used by anyone including crafters, teachers, construction workers, or just about anyone who cuts. You will want to consider the size and shape of your best cutter when making a purchase.

Choosing the right cheap plasma cutter can make all the difference. Whether you’re looking for a precise and effective carving tool or need to cut any materials, have a look through our range of cutters to find exactly what you’re looking for.

Here we review the best cheap plasma cutter, so you can choose the right cutter for any kind of your work.

List of 10 Best cheap plasma cutter: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the cheap plasma cutter to grab the best one.

1. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display

Features :

  • ๐Ÿ›ก๏ธใ€High Qualityใ€‘Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Auality Consumables
  • ๐Ÿ›ก๏ธใ€Portable Designใ€‘ Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle๏ผŒIt Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables
  • ๐Ÿ›ก๏ธใ€Dual Voltageใ€‘This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V/220V), Plug And Play In Different Environments, No External Conversion Plug Required
  • ๐Ÿ›ก๏ธใ€Applicationใ€‘This Is A Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm

Additional Info :

2. YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable plasma cutter machine with accessories

Features :

  • High-Frequency Cut: The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/8″@110V,5/16″@220V
  • Lightweight and Portable: It is convenient to do home DIY and general repairing work. Dimension: 14.8″(L)x 6.5″(W)x 12.0″(H). Weight: 11lb
  • Widely Applied IGBT Inverter: It adopts IGBT inverter technology, features with current control, high quality and stable performance, suitable to cut stainless steel, alloy steel, mild steel, copper, etc.
  • Dual Voltage:It allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter. Suitable home DIY and industrial projects.
  • Multi-protection in One Cutter: With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way.

Additional Info :

3. TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2″ Clean Cut

Features :

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2″ clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Portable: Auto-voltage adapts to 110 V – 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

4. Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)

Features :

  • ใ€Pilot Arc Functionใ€‘This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
  • ใ€Dual-Voltage 110/220Vใ€‘Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
  • ใ€Air Pressure & Air Compressorใ€‘The regulator and gauge are installed in front of the panel๏ผŒyou can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
  • ใ€Post Time Functionใ€‘With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
  • ใ€Cutting Thicknessใ€‘The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

5. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features :

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Additional Info :

Item Dimensions
Height 19
Width 11
Length 20

6. LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,ยฝ Inch Clean Cut,Brown

Features :

  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2″ ; Max Severance Thickness: 3/4″; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
  • โ˜… ๐“๐ข๐  ๐–๐ž๐ฅ๐๐ž๐ซ: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).
  • โ˜… ๐’๐ญ๐ข๐œ๐ค/๐Œ๐ฆ๐š ๐–๐ž๐ฅ๐๐ž๐ซ: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.

Additional Info :

Color Brown
Item Dimensions
Height 12.5
Width 8
Length 17
Weight 44.5

7. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Features :

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow๏ผšWhen you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability๏ผš10-55 A DC output, 1/2โ€ideal clean cut and 3/4โ€maximum severance cut under 220/240V๏ผŒ60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable๏ผšAllows for connection to 110- or 220-volt receptacles without tools๏ผŒPortable in the shop or at the job siteโ€”at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety๏ผšCertificated by ETL๏ผŒAutomatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Additional Info :

8. Lotos LTP8000 80 A Plasma Cutter with Pilot Arc Metal Cutter 220~240V, 1 inch Clean Cut, Brown

Features :

  • โ˜… CUT THICKNESS: Ideal Cut: 1″ Inch; Maximum: 1 1/2″ Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. โ˜… INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
  • โ˜…NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. โ˜… 2T/4T ENABLED: Release your finger for long time cutโ˜… THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000 Plasma Cutter are: BCON40 and BCON90. Please search “Lotos BCON40” or “BCON90”
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • โ˜… SETUP WITHIN 1 MIN: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • โ˜… PACKAGE INCLUDES: 70AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

Additional Info :

Color Brown
Item Dimensions
Weight 38
Release Date 2018-03-15T00:00:01Z

9. Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

Features :

  • โ˜… PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5โ€ (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
  • โ˜… CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
  • โ˜… SETUP WITHIN 1 MIN–the per-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • โ˜…INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. โ˜…OUTPUT: 20-55 A DC output, 3/5โ€ ideal clean cut and 1โ€ maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. โ˜…SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

10. hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Features :

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220Vยฑ15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine)
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of cheap plasma cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display
9
9
9.3
2 Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting...
8.8
9.8
9.8
3 YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable...
9.2
8.8
9.7
4 TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting...
9.7
9.2
9.5
5 Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed...
9.6
8.8
9.5
6 Display4top CUT-50 Plasma Cutter, Dual Voltage 110/220V Plasma Cutting Machine, Compact DC Inverter...
8.9
9.5
9.3
7 YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V...
8.8
9.5
9
8 YESWELDER 110 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
9.4
9.1
9.4
9 P-80 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit Pilot Arc Starting (One...
9.7
9
9.1
10 Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max...
9.3
9.3
9.2

ย 

What to Consider When Choosing the Best Manual cheap plasma cutter

The Best Manual cheap plasma cutter saves time compared to wet saws. They’re simple to use and produce faultless results. Not all manual cheap plasma cutterare effective. This section explains how to choose the best manual tile cutter.

Material Cutters

“cheap plasma cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

cheap plasma cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual cheap plasma cutter.

cheap plasma cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals cheap plasma cutter. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual cheap plasma cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best cheap plasma cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace cheap plasma cutter Blade?

Nearly every warehouse has a cutter, often known as a cheap plasma cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

cheap plasma cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The cheap plasma cutter

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our cheap plasma cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the cheap plasma cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The cheap plasma cutter Back Together

We should now begin putting the cheap plasma cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your cheap plasma cutter will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the cheap plasma cutter to ensure that it is at a comfortable resistance.

3 Features of a cheap plasma cutter

The following characteristics are necessary for a heavy-duty cheap plasma cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because cheap plasma cutter with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your cheap plasma cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a cheap plasma cutter with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. Itโ€™s also why several of our tools look different from anything else youโ€™ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you donโ€™t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment