Best Cutter’s Edge Reviews 2022

These best cutter’s edge enable you to cut items smoothly. Most of the products reviewed here are designed to use for multiple purposes.

A cutter’s edge is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is highly versatile, lightweight, and heavy-duty, have traditional wheels and ever-so-effective rocker blades.

All you need is to place the cutting material and then run the cutter on it. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

Top 10 Best cutter’s edge: Our Picks

1. Swingline Paper Cutter for Scrapbooking, 12 Inch, Titanium Manual Paper Trimmer & Slicer with Security Safeguard & Side Ruler, Portable Straight Edge Cutter for Large & Small Craft, Photo & Card

Features :

  • A CUT ABOVE THE REST – Get your scrapbook or craft project done in a jiffy with this straight cutter! It can cut paper, labels, pictures, stickers, PVC film, laminated sheets, and even cardboard.
  • PRECISION IN EVERY SLICE – This manual paper trimmer comes with a cutting ruler built in on the board. With our cutter for crafts, you can cut in straight lines, exact measurements, and accurate angles.
  • SHARP & SECURE BLADE – Work on paper crafts the safe way. The mini guillotine blade of our paper cutter slicer is tucked away and cuts only when you slide the knob. It cuts in one stroke too!
  • GENUINELY RELIABLE – Swingline has been making scrapbooking supplies since 1925. Our page cutter comes from a long tradition of making dependable and professional paper crafting tools.
  • SATISFACTION GUARANTEED – We stand by our commitment of being a brand that customers can trust. If you’re not thrilled with our titanium guillotine paper cutter, contact us and we’ll make it right.

Additional Info :

Release Date 2021-06-15T00:00:01Z

2. Pacific Handy Cutter RB009 Standard Single-Edged Industrial Razor Blades for Box Cutters, Box Of 100, Ultra Sharp, Single Edge, Replaceable Blades, Stainless Steel

Features :

  • INDUSTRY-STANDARD BLADE – This widely used blade from industry leader Pacific Handy Cutters fits a range of tools, including PHC’s original Handy Cutter (both the HC900 and HC100), the HH700 Strapping & Band Cutter, PHC Scrapers, and more.
  • LONG-LASTING, PRECISE CUTTING – With a box of 100 long-lasting, replaceable blades, never get stuck with a dull blade again. Ensure your tools are always razor sharp and ready to cut, slice, or trim.
  • ULTRA SHARP SINGLE-EDGE BLADES – These razor sharp blades cut cleanly and evenly through thick, difficult material with ease and have been widely used in industrial and manufacturing settings for over 70 hears.
  • ONLY 0.009″ THICK – At 0.009″ thick, these blades are honed to precision and compatible with a wide range of industry tools.

Additional Info :

Color STAINLESS STEEL
Item Dimensions
Height 0.90157480223
Width 1.79921259659
Length 4.79921259353
Weight 0.05291094288
Release Date 2017-06-12T00:00:01Z

3. IGAN-P6 Wire Flush Cutters, 6-inch Ultra Sharp & Powerful Side Cutter Clippers with Longer Flush Cutting Edge, Ideal Wire Snips for Crafting, Floral, Electrical & Any Clean Cut Needs

Features :

  • 1.Ultra-Sharp Wire Cutters: 13/16” extra-long cutting edge can easily snips electrical wire up to 12 AWG.
  • 2.Specialized Flush Cut: Improved blades design provide a smooth, flat and clean cut. Ideal wire cutters for Crafting, Floral wire, Electrical wire, Artificial flowers, Cable Ties, Plastic, Edge banding, etc.
  • 3.High Hardness CR-V: Forged from chrome vanadium tool steel, heat-treated and precision ground angled head. One of the strongest 6-inch wire clippers.
  • 4.Labor-saving Tools: Perfect length to provide great leverage with a spring-loaded mechanism to minimize hand fatigue.
  • 5.Full lifetime warranty: If any IGAN P6 Flush Cutter ever fails for any reason, simply email or reply to the IGAN customer service and IGAN will ship a replacement.

Additional Info :

4. ECOHU Round Corner Punch, 3 in 1-3 Way Corner Puncher Cutter for Paper Craft (R4mm+R7mm+R10mm) for Cutting Different Corners, DIY Projects, Card Making & Scrapbooking

Features :

  • ✔️ 3-in-1 CORNER ROUNDER PUNCH: Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter. Designed to punch three different corners, this corner rounder is the perfect tool for giving some extra vitality to your creations.
  • ✔️ WIDELY APPLICATION: It will make crisp, flawless cut-outs from cardstock, scrapbook paper, vellum and more. Suitable for cutting paper, photograph, scrapbooking, business card or gift card, the small corner rounder punch is suit for using in office, school, home, etc
  • ✔️ CUTS 4MM 7MM 10MM CORNER: This compact corner rounder cutter corner radius, which are great for paper craft projects. Corner rounder small and sturdy design fits perfectly in your hand, the corner cutter will give you 4mm 7mm 10mm size rounded corners
  • ✔️ DURABLE AND STURDY: The durable and sturdy plastic housing is well processed, which is burr-free and smooth for max comfort and longtime use. The stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance.
  • ✔️ SIMPLE TO USE WITH TIPS: Make sure the edges of the paper to be cut are flat, smooth, paper is 90° and insert the sharp corner to the top. If your paper is too thin, use 2-3 layers with thickness less than 2MM and don’t use the Sticky paper to avoid make the punch get stuck.

5. Manual Edge Banding Trimmer for Woodworking, Veneer Edge Cutter Tool for Wood Edge Banding

Features :

  • The edge band trimming tool is composed of a knife rest and a blade. Because of the special design for the holder, both professionals and hobby woodworkers can operate it easily with minimum effort.
  • The edge banding tool has an easy blade release mechanism, which helps to replace the blade safely and avoid injury. The wood band cutter match with most standard size art blades for extra convenience.The blade size is 100*18mm.
  • The wood veneer edge trimmer can be used on a wide range of materials such as wood veneer, melamine, plastic, PVC and so on in the woodworking field including furniture, shelving and cabinetry.
  • GUARANTEED – If with any reason you are not satisfied with our product, please contact us and you can get a full refund.

Additional Info :

Item Dimensions
Height 0.24
Width 3.74
Length 6.3
Weight 3.62

6. Cutter & Buck womens Cb Drytec Edge Full Zip Warm Up or Track Jacket, Navy Blue/Cardinal, Medium US

Features :

  • Zip-front jacket in moisture-wicking fabric featuring contrast piping at shoulders
  • Stand collar
  • Zippered welt pocket on right side

Additional Info :

Color Navy Blue/Cardinal
Item Dimensions
Height 2
Width 12
Length 15.5
Weight 0.9

7. Edge Banding Trimmer, Mini Plastic PVC Plywood Melamine Wood Edge Band Cutter, Manual Trimming Woodworking Tool

Features :

  • 【PVC Material】The edge banding machine edge banding is made of high quality PVC material, solid and not easy to aging, edge band trimmer non-slip top surface is easy to operate and durable to use.
  • 【with 2 Sets Blades】Edge banding trimmer is Comes with two sets of blades, a set of original, a set of replacement. Edge band trimmer is more durable and lasting for long time use.
  • 【Edge Band Specifications】Edge banding trimmer fits for edge banding thickness below 0.5mm, width between 15-40mm.
  • 【Supported Trimming Materials】Edgeband trimmer edge banding tools is Mainly used to trim edge banding made of these material: flexible melamine paper, veneer, plastic, PVC etc.
  • 【Applicable Scene】Edge band trimmer is Wide application, suitable for panel type furniture, cabinet making, decoration and other industries, really an essential edge banding tool for woodworking. Perfect Holiday and Christmas Gift for your friends and families.

Additional Info :

Color Blue
Item Dimensions
Height 1.968503935
Width 2.362204722
Length 3.93700787
Weight 0.2645547144

8. AFA Tooling – Deburring Tool with 10 Extra High Speed Steel Blades – Works on Metal, Resin, PVC, and 3D Printed Plastic Edges – Great for Copper and PVC Pipes, 3D Printing, Resin Art, and Metal Work

Features :

  • TOTAL OF 11 HEAVY-DUTY S-BLADES – We know that heavy use can dull your blades, so we have included an extra 10 pack of razor sharp BS1010 replacement blades. If you ever do need more above your initial 11, please purchase our standalone BS1010 replacement blades pack.
  • MULTI MATERIAL APPLICATION – Our deburring tool is great for many types of edge cleanup. Works great for cleanup of brass, steel, aluminum, copper or PVC pipes, as well as metal edges of auto parts, gears, or any other freshly cut metal parts. Also great for trimming the edges of your 3D printed plastic objects or parts. Resin art is booming, and our deburring tool is perfect for shaving and smoothing. Whether you are an industrial professional or a DIYer, our deburring tool is great for you!
  • HIGHLY DURABLE HSS STEEL DEBURRING BLADES – The blades are made of tempered high-speed steel that makes them sharp, strong, and resistant to wear. HSS steel is usually 80% longer lasting then regular steel, and that’s why we use it, because we care about our performance!
  • SUPERIOR QUALITY AND COMFORT – Equipped with an ergonomic aluminum handle for secure grip, quality machined parts and a secure case for our extra blades, we know our tool Is built to last.
  • OUR GUARANTEE: We have been in business since 2013, and we care about our customers! All our Deburring tools are secured by a 1 year warranty! If you have any issues outside of the usual wear of the blades, we will replace your tool for free! If you have any other questions or concerns please feel free to contact us!

Additional Info :

Color Deburring Tool
Item Dimensions
Height 2
Width 4
Length 10
Weight 0.1875

9. Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

Features :

  • Easy To Use – Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue.
  • Save Time – Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!
  • Sharp, Leave No Trace – The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss.
  • Easy Conversion – Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time.
  • Cuts in Both Directions – The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing edge banding.

Additional Info :

Item Dimensions
Height 2.6
Width 7.2
Length 4

10. Veneer Edge Trimmer, Edge Banding Cutter Plastic PVC Plywood Melamine Wood Manual Edge Banding Machine Trimming Woodworking Tool

Features :

  • Made of high quality PVC material, sturdy and durable
  • With spare blade, it can be replaced after wear
  • Fit for edge banding thickness below 0.5mm, width between 15-40mm
  • Used to flexible melamine paper, wood, plastic, PVC, etc
  • Suitable for furniture, cabinet making, decoration and other industries

Additional Info :

Color Blue

List of cutter’s edge: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Swingline Paper Cutter for Scrapbooking, 12 Inch, Titanium Manual Paper Trimmer & Slicer with...
9.2
9.1
8.9
2 ECOHU Round Corner Punch, 3 in 1-3 Way Corner Puncher Cutter for Paper Craft (R4mm+R7mm+R10mm) for...
8.9
9.6
8.8
3 AFA Tooling - Deburring Tool with 10 Extra High Speed Steel Blades - Works on Metal, Resin, PVC, and...
9.3
8.8
9.4
4 IGAN-P6 Wire Flush Cutters, 6-inch Ultra Sharp & Powerful Side Cutter Clippers with Longer Flush...
9.1
9.2
8.8
5 Veneer Edge Trimmer, Edge Banding Cutter Plastic PVC Plywood Melamine Wood Manual Edge Banding...
9.1
9
9
6 MyArTool 3 Way Corner Rounder Punch, 4mm, 7mm, 10mm 3 in 1 Corner Cutter for Card Making, Laminate,...
9.1
9
9.8
7 Hilitand Edge Banding Trimmer, Wood Veneer Edge Trimmer, Edge Band Cutter, Manual Trimming...
8.8
9
9.1
8 Manual Edge Banding Trimmer for Woodworking, Veneer Edge Cutter Tool for Wood Edge Banding
9.8
9.7
9.8
9 Cutter & Buck Women's Drytec Edge Full Zip Jacket, Reflect, Large
8.8
9.5
9.3
10 Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)
9.7
8.8
9.2

How to Choose the Best cutter’s edge?

To help you pick the best cutter’s edge for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a cutter’s edge, it is something to prioritize during selection.
  • Foldable Design- If you need to carry cutter’s edge in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most cutter’s edge features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all cutter’s edge cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. cutter’s edges actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut cutter’s edge. Each of these types of cuts can shape how you position yourcutter’s edge, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most cutter’s edge are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic cutter’s edge if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated cutter’s edge. Hydraulic cutter’s edge is especially helpful if you’re trying to cut through thicker locks.

Size

cutter’s edge are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small cutter’s edge

Small cutter’s edge that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of cutter’s edge, such as the outstanding Knipex Tools cutter’s edge, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized cutter’s edge

Medium-sized cutter’s edge range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large cutter’s edge

Large cutter’s edge that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most cutter’s edge are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The cutter’s edge may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini cutter’s edge or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier cutter’s edge offers more metal-crushing force, but it causes fatigue over time. A lightweight cutter’s edge is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

Questions and Answers

  • Which cutters are best for electricians, according to #1?

Ans: Depending on your line of work, you could need a cutter that meets specified requirements. For instance, cutter’s edges with a needle-nose are used by electricians. They have tapered jaws that make it simple for them to bend wires and insert them into panels that are too small for any other type of cutter or plier to fit.

How should I pick a cutter?
  • Ans: When selecting a cutter, there are a few things to consider. Consider, for instance, the blade’s ability to cut, the handles’ length and insulation, the material from which they are formed, etc. Different cutter’s edge are used for various tasks. Choose the option that will enable you to complete your assignment with the very minimum amount of effort.
3. What distinguishes cutters from strippers?
  • Ans: Contrary to what their names might imply, cutters focus primarily on cutting, whilst wire strippers assist in removing the insulation.
4. If I cut a cable wire, would I get electrocuted?
  • Ans: There is a chance of electrocution while cutting a cable wire. Wire cutters include handles with rubber insulation to absorb such unforeseen shocks to reduce this risk.
5. For what purpose do cutters have holes?
  • The wire cutters’ holes make it easier to use small bolts and screws. To achieve this, one must thread a bolt or screw the correct length into the appropriate-sized hole. When the handles are squeezed together, the bolt or screw will have a clean trim without any damage to the threads.
6. How are heavy-duty cuts?
  • Ans: Working with heavy-duty jobcan be demanding and difficult. You need a variety of heavy-duty wire cutters to successfully cut heavy-duty wires in order to ease the difficulty of this challenging work.

The following is a list of some safety advice you can use when cutting through heavy-duty wires.

  • To protect your eyes, you must use eye protection. This will shield you from any mishaps and stop dust, debris, and other flying objects from getting in your eyes.
  • To ensure that the contact between the wire and the cutter is stable, cut the wire at an angle. This will stop any slippage-related mishaps.
  • In order to prevent the cutter’s edge from flying off your palm and landing somewhere else, you must firmly grasp the handle.
  • The cutter’s edge needs to be constantly oiled and lubricated to stay in top shape and cut wires effectively.
  • We have compiled a list of the various cutter’s edges that are offered on the market. Every one of the products listed is specifically made for its assigned function and falls into a designated category.

Therefore, we have compiled a comprehensive list containing the aforementioned attributes to make the challenging decision of choosing the right cutter’s edge simple.

Leave a Comment