10 Best Diy Styrofoam Cutter Reviews And Buying Guide

Once you’ve tried a diy styrofoam cutter, you never go back. Best diy styrofoam cutter can make any work easier, especially when dealing with a lot of cutting. Best diy styrofoam cutter can be used by anyone including crafters, teachers, construction workers, or just about anyone who cuts. You will want to consider the size and shape of your best cutter when making a purchase.

Choosing the right diy styrofoam cutter can make all the difference. Whether you’re looking for a precise and effective carving tool or need to cut any materials, have a look through our range of cutters to find exactly what you’re looking for.

Here we review the best diy styrofoam cutter, so you can choose the right cutter for any kind of your work.

List of 10 Best diy styrofoam cutter: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the diy styrofoam cutter to grab the best one.

1. Foam Cutter, Jhua Hot Wire Knife Foam Cutter Electric Styrofoam Cutting Tool, 15W Foam Board Cutter with 4 inch Cutting Machine Pen for Styrofoam Foam Cutting, Arts, Crafts DIY

Features :

  • HEAT UP QUICKLY! – The hot knife foam cutter can heat the tube to 150°C/302℉ within 10 seconds.
  • ❤ NOTE: WATCH OUT FOR BURNS! KEEP AWAY FROM CHILDREN!
  • CLEAN & SMOOTH CUTTING! – Hot wire foam cutter cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris! You can cut the form board or foam block from any angle and craft into your desired shape.
  • STRONG & DURABLE! – The cutting pen/needle/rod is sturdy & very secure in the base, cuts and shapes quickly in any direction. The hot wires can bend to the shape you want, but only once otherwise it will break.
  • EASY TO USE! – One key switch, very convenient to switch electric foam cutter on and off.
  • ❤ NOTE: Recommended continuous use hot wire foam cutter’s time does not exceed 30 minutes.
  • WIDELY USE! – Ideal for low density styrofoam cutting, handmade practise, advertising words making, even kids model making. This hot pen will take you to a magical kingdom.

Additional Info :

Color Blue

2. 110V Electric Hot Foam Cutter Knife Grooving Wire Styrofoam Engraving Tool Kit Blade Slotting Board DIY Sculpture (Full set)

Features :

  • [BASIC INFORMATION]: Power supply: 110V/50Hz,150W, Interval work: 1/4min, Body weight: 0.4kg, Length wire: 3.0m, Adjusting Knob: 16taps/6steps.
  • [PACKAGE INCLUDE]: The electric foam cutter*1, The small/ large slotting board, The 300mm flexible blades*2, The straight blades 150mm/200mm. Wrench*1. Steel brush*1.
  • [ADVANTAGES]: Pure copper cutter seat, faster preheating and the blade can be heated to 500 degree in several seconds. The metal hook is safer and more convenient and it can be hung to save the space when not in use.
  • [APPLICATION]: Suitable for commercial and industrial use, it can cut lightweight foam, KT board pink foam, polyurethane, polyethylene, expanded polystyrene (EPS) and extruded polystyrene (XPS), styrofoam, polyester foam, sponge, rubber etc.
  • [WARRANTY]: We keep pursuing the 100% satisfaction of our customers. If for any reason you are not satisfied with your purchase, please contact us and we will provide the best solution for you very quickly! Thank you for the understanding!

Additional Info :

Color Pink

3. Podoy Hot Wire Foam Cutting Machine Working Table Tool for Cutting Foams Sponge Pearl Cotton KT Board DIY Styrofoam Polystyrene Cutter Electric Heating

Features :

  • 【Foam Cutting Machine】:Hot wire foam cutter is a professional heat cutting machine for foam, sponge, EPE, ribbon, KT board,It can heat up in several seconds.This machine has complete function, safe and reliable, simple operation.And it can adjust the angle, cutting angle.At the same time with a switch, the operation is more convenient!
  • 【Application】Especially suitable for building, planning and design units, advertising enterprise production model use, teaching model, small scale cutting foam, sponge, extruded board production.
  • 【Operation】:Adjust the working angle of vertical angle device to the right.The shift switch is adjusted to the open gear, and adjust the applied temperature. Wait for 3-5 second immediately after cutting articles.
  • 【Warning】: Please be sure to unplug the power line installation or removal of the electric heating wire before. Must be in the machine completely cooled condition of operation.
  • 【Package includes】: 1 Set of Foam Cutting Machine,1 x Power Cable,1 x Manual

4. 100-240V Hot Wire Foam Cutter, Jhua Hot Knife Foam Cutter Electric Styrofoam Cutting Tool, 572℉ Foam Board Cutter with Cutting Machine Pen for Styrofoam Foam Cutting, Arts, Crafts DIY (5cm/1.97in)

Features :

  • HEAT UP QUICKLY! – The hot knife foam cutter can heat the tube to 300°C/572℉ within 10 seconds.
  • CLEAN & SMOOTH CUTTING! – Hot wire foam cutter cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris! You can cut the form board or foam block from any angle and craft into your desired shape.
  • STRONG & DURABLE! – The cutting pen/needle/rod is sturdy & very secure in the base, cuts and shapes quickly in any direction. The hot wires can bend to the shape you want, but only once otherwise it will break.
  • EASY TO USE! – One key switch, very convenient to switch electric foam cutter on and off.
  • WIDELY USE! – Ideal for low density styrofoam cutting, handmade practise, advertising words making, even kids model making. This hot pen will take you to a magical kingdom.
  • ❤ NOTE1: WATCH OUT FOR BURNS! KEEP AWAY FROM CHILDREN!
  • ❤ NOTE2: Please avoid excessive voltage causing the pen needle to burn red, which will shorten the life of the cutting pen. The power supply should be disconnected when not in use.
  • ❤ NOTE3: Recommended continuous use hot wire foam cutter’s time does not exceed 30 minutes.

Additional Info :

Color Red

5. RoMech Foam Cutter – Pro Electric Hot Knife (200W) – Styrofoam Cutting Tool Kit- with Blades & Accessories (RM-005)

Features :

  • ✅【CLEAN AND SMOOTH CUT, NO MESS】RoMech hot knives cut the styrofoam smooth and fast like butter, seal the edges clean, and leave no debris! You can cut the foam board or foam block from any angle and craft into your desired shape
  • ✅【ADJUSTABLE POWER 】The heat power can be approximately controlled by using the temperature control dial on the handle. Fifteen heat-intensity graduations ensure the proper temperature for any job
  • ✅【INDUSTRIAL GRADE 】Suitable for commercial and industrial use, it can cut lightweight foam, KT board pink foam, polyurethane, polyethylene, expanded polystyrene (EPS) and extruded polystyrene (XPS), styrofoam, polyester foam, sponge, rubber etc
  • ✅【HANDY KIT 】Includes RoMech heat cutter, one 6″ and one 8″ blade, hard plastic case, hex wrench and cleaning brush. Ideal for use in architectural modelling, design and DIY projects
  • ✅【RoMech BRAND QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 45-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!

Additional Info :

Color Pink
Item Dimensions
Height 4
Width 11
Length 13.1
Weight 3

6. Hot Wire Pen, Hot Wire Cutter, Heat Up Quick Styrofoam Cutting Pen for Amateur DIY, Art Making, Foam Carving for Sponge(25cm(15v 2A))

Features :

  • The cutter heats up quickly, very convenient to use.
  • It cuts the foam smooth and fast, seals the edges clean, and leaves no debris.
  • This hot knife is designed to easily cut materials such as Styrofoam.
  • You can cut the form board or foam block from any angle and craft into your desired shape.
  • It is suitable for commercial artwork development, complex and small font design in advertisement (such as letters) and art piece creation.

Additional Info :

Color 25cm(15v 2a)
Item Dimensions
Height 1.968503935
Width 1.968503935
Length 7.87401574
Weight 0.12345886672

7. 2 Pack 572°F Electric Foam Cutter,Hot Wire Hot Knife Styrofoam Cutter Sculpting Tool 4″ Foam Cutting Pen for Polyethylene EVA Foam Carving DIY Crafts

Features :

  • 【Two Cutting Pens for Long-term Continuous Use】 Each brand’s foam cutter can only be used 30-45 minutes at a time and then take a break, 2-3 times a day, which is limiting for many projects. So with two foam cutting pens you don’t have to stop to wait for another cutter to cool down while working on your project, which saves much time.
  • 【Hotter & Smoother Cutting】 Our foam board cutter can reach 300°C/572°F within 10 seconds, which beats most styrofoam cutting pens on the market that can only heat up to 200°C/400°F or less. With this high temperature, it cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris.
  • APPLICATIONS: It is suitable for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist and even model making lessons by kids at school.
  • 【Metal Stand Holder for Resting】Package also comes with a metal stand holder for resting the heated pen, so you don’t have to worry about where to rest it when you want a break from your work. Also the handle is good thickness and non-slip, so you can get a full grip and won’t get strain for large projects.
  • 【 strong-quality & comfortable-grip】The Cutting Pen/Needle/Rod is Sturdy & Very Secure in the base, and it doesn’t bend much even carving through large pieces of styrofoam. The handle is Good Thickness and Non-Slip, so you can get a Full Grip and Won’t Get Strain for large projects.

8. YaeTek Micromot Hot Wire Cutter Thermocut Foam Cutting Machine, 110V Table Top Styrofoam Cutter Cutting Foams, Sponge, Pearl Cotton, KT Board DIY Styrofoam Polystyrene

Features :

  • Voltagle:US AC 110V,Power: 30w
  • Temperature Range: 50 degree-300 degree
  • Max. Cutting Height: about 20cm 8″
  • Good Temperature Stability
  • Package Included: 1 X Table Foam Cutter,1 x Power Cable,1 x Cutting Wire (installed on the rail of the cutting machine) ,1 x Wrench

9. 110V Air Cooled Electric Foam Cutter Heat Cutting Knife (200w) Continuous Use Styrofoam Engraving Slotting Carving Tool Kit Blade DIY Sculpture (With straight blade)

Features :

  • [BASIC INFORMATION]: Ships from USA! Power supply: 110V 50HZ, Maximum power: 200W, Maximum temperature: 500 degrees, Body weight:600g. (We also can supply the 220V and if you need, please leave us a message, or we will only send you the 110V one!)
  • [PACKAGE INCLUDE]: Straight Blade Kit: Heat cutter*1, 15cm straight blade*2, 20cm straight blade*2, hard plastic case*1, hex wrench*1, cleaning brush*1.
  • [PRODUCT USAGE]: Used for cutting and grooving of EPS foam; on-site construction of indoor and outdoor insulation of buildings. Cutting operation of XPS extruded board.
  • [PRODUCT FEATURES]: Continuous operation for long hours and greatly save your time! Suitable for on-site construction; fast heating, adjustable temperature and light weight. Ergonomics handle allows you to use it with one hand, making it easy and effective to do your project. Also, it prevents your hand from being strained or tired. 
  • [QUALITY COMMITMENT AND CUSTOMER SERVICE]:One Year Warranty! We’re sure that you will fall in love with this DIY craft tool. Contact us freely if you have any problems!

10. WINONS Hot Wire Foam Cutter, WFC-0001 Polystyrene and Styrofoam Cutter Same as a Hot Knife Foam Cutter, Electric Carving Knife-Kit of 3 Tools

Features :

  • Package Includes: 6.6″ tensioner, 4.2″ wand-style, 1.3″ engraving tip, safety stand and replacement wire. Metrics for all the tools are sharpened with sheer vigilance to assist you with the most difficult cuts while enabling you to work on both large and small foam-based projects with ease.
  • Safety: In order to comply with the safety and sustainability standards our handle comes with a UL approved power supply and a secure power switch for safety purposes as the tips heat up quite fast
  • Practicality: Easily replaceable nozzles, overheat protection, equipped with a stand to place the heated needle for your safety and convenience
  • Enhancements: Rather than manufacturing a product from scratch, we improve our products by thoroughly analyzing the similar products available in the market, our tool incorporates a longer tip to be used as a saw for enhanced efficiency
  • Customer Care: We offer a lifetime money-back warranty for any pertinent issue reported and a 24/7 customer support for our valuable customers

Additional Info :

Color Dark Green
Item Dimensions
Height 1.2
Width 6.5
Length 8
Weight 0.61875

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of diy styrofoam cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Foam Cutter, Jhua Hot Wire Knife Foam Cutter Electric Styrofoam Cutting Tool, 15W Foam Board Cutter...
9.8
8.8
9
2 110V Electric Hot Foam Cutter Knife Grooving Wire Styrofoam Engraving Tool Kit Blade Slotting Board...
8.9
9.4
9.1
3 100-240V Hot Wire Foam Cutter, Jhua Hot Knife Foam Cutter Electric Styrofoam Cutting Tool, 572℉...
9.5
9.1
9.6
4 YaeTek Micromot Hot Wire Cutter Thermocut Foam Cutting Machine, 110V Table Top Styrofoam Cutter...
9.1
8.8
8.8
5 10cm Electric Hot Wire Foam Cutter 18W DIY Foam Cutting Machine Foam Engraving Crafts 110-250V (US...
9
9.2
9.6
6 Hot Wire Pen, Hot Wire Cutter, Heat Up Quick Styrofoam Cutting Pen for Amateur DIY, Art Making, Foam...
9.4
8.9
9.4
7 WINONS Hot Wire Foam Cutter, WFC-0001 Polystyrene and Styrofoam Cutter Same as a Hot Knife Foam...
9.4
9.8
9.7
8 Foam Styler-S Hot Wire Cutter StyroFoam Cutting Machine - Multipurpose Tabletop DIY Tool for Cutting...
9.3
9.2
9.6
9 2 Pack 572°F Electric Foam Cutter,Hot Wire Hot Knife Styrofoam Cutter Sculpting Tool 4" Foam...
9.1
8.9
8.8
10 Podoy Hot Wire Foam Cutting Machine Working Table Tool for Cutting Foams Sponge Pearl Cotton KT...
9.7
9
9.8

 

What to Consider When Choosing the Best diy styrofoam cutter

The Best diy styrofoam cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual diy styrofoam cutterare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“diy styrofoam cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

diy styrofoam cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual diy styrofoam cutter.

diy styrofoam cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals diy styrofoam cutter. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual diy styrofoam cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best diy styrofoam cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace diy styrofoam cutter Blade?

Nearly every warehouse has a cutter, often known as a diy styrofoam cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

diy styrofoam cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The diy styrofoam cutter

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our diy styrofoam cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the diy styrofoam cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The diy styrofoam cutter Back Together

We should now begin putting the diy styrofoam cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your diy styrofoam cutter will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the diy styrofoam cutter to ensure that it is at a comfortable resistance.

3 Features of a diy styrofoam cutter

The following characteristics are necessary for a heavy-duty diy styrofoam cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because diy styrofoam cutter with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your diy styrofoam cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a diy styrofoam cutter with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment