Best Harbor Freight Spot Weld Cutter On Amazon

These best harbor freight spot weld cutter enable you to cut items smoothly. Most of the products reviewed here are designed to use for multiple purposes.

A harbor freight spot weld cutter is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is highly versatile, lightweight, and heavy-duty, have traditional wheels and ever-so-effective rocker blades.

All you need is to place the cutting material and then run the cutter on it. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

10 Best harbor freight spot weld cutter Ranked for 2022

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the harbor freight spot weld cutter to grab the best one.

1. 14-Pack Spot Weld Cutter Sets Double Sided, 3/8″ HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

Features :

  • Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size.
  • Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when one side gets dull you simply have to flip the bit around on its arbor assembly.
  • Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal.
  • Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
  • Spot Weld Cutter Tool:Easy to replace the blades when it begins to dull.

Additional Info :

Item Dimensions
Height 1.06
Width 1.96
Length 4.13

2. Lisle 51900 Spot Weld Chisel

Features :

  • Separates Spot Welded Panels.
  • Use to separate panels after the spot weld has been drilled out.
  • Drive the blade with a hammer from the end or the side through the panel seam.
  • Panels are separated without damage.
  • The blade is sharpened on three sides, and offset for clearance.
  • NOTE: The sharpened edges will wear with use. Resharpen on a grinding wheel.

Additional Info :

Color Factory
Item Dimensions
Height 0.5
Width 3
Length 14.5
Weight 0.54

3. Neiko 10052A Spot Weld Drill Bits, High Speed Cobalt Steel with Titanium Coating | 8mm (5/16-Inch)

Features :

  • [APPLICATION]: Use this spot weld drill bit to separate spot welds and resistance spot welding panels without distorting the sheet metal.
  • [HEAVY DUTY]: Special grade high speed steel cobalt mix is designed for long service life to withstand quick speed running rate.
  • [DURABLE]: Heat resistant titanium coating withstands high-performance metal and wood drilling when used in high temperature environments.
  • [PRO GRADE]: Flat ground surface on bottom half of bit provides additional strength and chuck hold on any welding drill.
  • [PRECISE]: Nibbed pilot tip design increases accuracy and prevents slipping when held down for marking purposes.

Additional Info :

Item Dimensions
Height 0.39
Width 2.01
Length 0.39
Weight 0.02

4. Spot Welder, Kerpu Mini Spot Welder, Portable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY 18650 Battery, Portable Battery Welder with Type-C port 2A Input

Features :

  • Our portable spot welders own perfect over-charge, over-discharge, over-temperature etc protection functions and double protection performance.Unique overheating protection device automatically cuts off power when the overheating occurs.
  • Adjustable output power of 6 grades, more accurate welding and more stability welding. Automatic and manual mode adjustable, easy to operate. Detailed English instruction manual, easier to use.
  • Suitable for 18650 and other cylindrical lithium batteries, nickel metal hydride batteries, cadmium nickel batteries can be welded firmly. It can be also used to weld iron, steel, stainless steel sheets with the thickness less than 0.2 mm/ 0.007 inch to other iron, steel, stainless steel materials. With it, save your time and effort.
  • The welding pen is comfortable to use, the length of welding pen is 40cm, that makes operation more flexible. It is low resistance oxygen free copper material, welding stability.
  • 【Our service】In the process of using the spot welder, please feel free to contact us if you have any questions. We will replace or refund for you to ensure that you can have a pleasant shopping experience.

5. Blair – Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11096)

Features :

  • Leading Manufacturer Of High-Quality Products
  • International Renown For Our Diverse Range Of Award-Winning Products
  • Fully Equipped With State-Of-The-Art Technology
  • All Products Have Been Designed With The Professional In Mind
  • Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User

Additional Info :

Color Factory
Item Dimensions
Height 1.5
Width 6
Length 8
Weight 0.1

6. Spot Weld Cutter Set Double Sided 14 Pcs,3/8″ HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

Features :

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates.
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck.
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
  • ◆【Package Include】:1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8″ cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8″ Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover
  • ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!

Additional Info :

Item Dimensions
Height 0.2
Width 1
Length 2

7. Spot Weld Cutter with 4 Pilot Pins, EONLION Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools

Features :

  • Durable- The material used is high-quality steel with excellent heat resistance. It can be used multiple times, and when one side becomes blunt, it can be used just as long as the other side is turned over.
  • Advantage- The Spot Welding Cutter Kit is suitable for drilling spot welds on most vehicle panels, and only removes the top panel while keeping the rear panel intact.
  • Double Sided- Double sided rotary cutter blade help you saving time and money .when one side gets dull you simply have to flip the bit around on its arbor assembly.
  • Corresponding use- 3/8″ diameter cutting blade is ideal for removing spot welds. 1/4″ standard shank with flat surface to eliminate rotation in the chuck (suitable for 1/4″ and larger drills). The tool is resistant Grinding, it can smoothly remove the waste during the processing operation.
  • Flexible Use- Spot welders can be used for cast iron, mold grinders, fixed vehicles, drilling, body refurbishment, etc. wherever you think is helpful.

8. EEEKit Spot Weld Cutter Kit, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools, 9 Pieces

Features :

  • PERFECT Fit: Universal fit with 1/4″ standard size arbor with flats to eliminate spinning in the chuck (fits 1/4″ and larger drills). Perfect tool for removing spot-welded panels or metal sheets
  • MATERIAL: Made of high-speed steel material, high hardness, and wear-resistant.
  • SUITABLE FOR: Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
  • EASILY SEPARATE: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc and cut small access holes.
  • DOUBLE SIDED: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter.

Additional Info :

Color Silver

9. CHICTRY Pilot Uniform Epaulets Traditional Professional Pilot Aviators Epaulettes Shoulder Boards Badge with Gold Stripes Three Bars One Size

Features :

  • 1 Pair of Professional Pilot Uniform Epaulets
  • Available in black fabric, with 1 to 4 gold stripes
  • Made of high quality polyester materials, nice seam
  • Stripes are reinforcement lined for a professional look
  • A great gift to aviators, they fit all pilot shirts

Additional Info :

Color Three Bars

10. Best Welds Mig Welding Nozzle Gel Tip Dip 16oz Welder 1 LB

Features :

  • MPN: 0-108-16, 1 pound jar/can
  • 16 oz Jar
  • Non-toxic
  • Odorless
  • Color: Blue

Additional Info :

Item Dimensions
Height 1
Width 1
Length 6
Weight 1

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of harbor freight spot weld cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet...
9.4
8.8
9.2
2 Spot Weld Cutter Set,13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement...
9.3
9.7
9.3
3 13pc Spot Weld Cutter Set 3/8" Double Sided Rotary Spot Weld Cutter Remover Drill Bits Cut Welds Kit...
9
9.8
9.1
4 EEEKit Spot Weld Cutter Kit, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill...
9.4
9.2
8.8
5 Mueller-Kueps Spot Welding Drill Bit HSSE 8x80mm – Ideal for Automotive Applications, Body Panels...
9
9
9.7
6 Blair - Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11082)
9.3
9.4
9.7
7 Lisle 51900 Spot Weld Chisel
8.8
9
9.5
8 Neiko 10052A Spot Weld Drill Bits, High Speed Cobalt Steel with Titanium Coating | 8mm (5/16-Inch)
9.3
9.2
9.2
9 Blair - Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11096)
8.8
8.9
9.6
10 Theia Plasma | Tips 5pcs 56811 40Amp| compatible Harbor Freight Titanium 45 Plasma cutter 56811
8.8
8.9
9

How to Choose the Best harbor freight spot weld cutter?

To help you pick the best harbor freight spot weld cutter for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a harbor freight spot weld cutter, it is something to prioritize during selection.
  • Foldable Design- If you need to carry harbor freight spot weld cutter in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most harbor freight spot weld cutter features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all harbor freight spot weld cutter cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. harbor freight spot weld cutters actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut harbor freight spot weld cutter. Each of these types of cuts can shape how you position yourharbor freight spot weld cutter, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most harbor freight spot weld cutter are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic harbor freight spot weld cutter if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated harbor freight spot weld cutter. Hydraulic harbor freight spot weld cutter is especially helpful if you’re trying to cut through thicker locks.

Size

harbor freight spot weld cutter are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small harbor freight spot weld cutter

Small harbor freight spot weld cutter that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of harbor freight spot weld cutter, such as the outstanding Knipex Tools harbor freight spot weld cutter, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized harbor freight spot weld cutter

Medium-sized harbor freight spot weld cutter range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large harbor freight spot weld cutter

Large harbor freight spot weld cutter that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most harbor freight spot weld cutter are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The harbor freight spot weld cutter may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini harbor freight spot weld cutter or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier harbor freight spot weld cutter offers more metal-crushing force, but it causes fatigue over time. A lightweight harbor freight spot weld cutter is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

Questions and Answers

  • Which cutters are best for electricians, according to #1?

Ans: Depending on your line of work, you could need a cutter that meets specified requirements. For instance, harbor freight spot weld cutters with a needle-nose are used by electricians. They have tapered jaws that make it simple for them to bend wires and insert them into panels that are too small for any other type of cutter or plier to fit.

How should I pick a cutter?
  • Ans: When selecting a cutter, there are a few things to consider. Consider, for instance, the blade’s ability to cut, the handles’ length and insulation, the material from which they are formed, etc. Different harbor freight spot weld cutter are used for various tasks. Choose the option that will enable you to complete your assignment with the very minimum amount of effort.
3. What distinguishes cutters from strippers?
  • Ans: Contrary to what their names might imply, cutters focus primarily on cutting, whilst wire strippers assist in removing the insulation.
4. If I cut a cable wire, would I get electrocuted?
  • Ans: There is a chance of electrocution while cutting a cable wire. Wire cutters include handles with rubber insulation to absorb such unforeseen shocks to reduce this risk.
5. For what purpose do cutters have holes?
  • The wire cutters’ holes make it easier to use small bolts and screws. To achieve this, one must thread a bolt or screw the correct length into the appropriate-sized hole. When the handles are squeezed together, the bolt or screw will have a clean trim without any damage to the threads.
6. How are heavy-duty cuts?
  • Ans: Working with a heavy-duty job can be demanding and difficult. You need a variety of heavy-duty wire cutters to successfully cut heavy-duty wires in order to ease the difficulty of this challenging work.

The following is a list of some safety advice you can use when cutting through heavy-duty wires.

  • To protect your eyes, you must use eye protection. This will shield you from any mishaps and stop dust, debris, and other flying objects from getting in your eyes.
  • To ensure that the contact between the wire and the cutter is stable, cut the wire at an angle. This will stop any slippage-related mishaps.
  • In order to prevent the harbor freight spot weld cutter from flying off your palm and landing somewhere else, you must firmly grasp the handle.
  • The harbor freight spot weld cutter needs to be constantly oiled and lubricated to stay in top shape and cut wires effectively.
  • We have compiled a list of the various harbor freight spot weld cutters that are offered on the market. Every one of the products listed is specifically made for its assigned function and falls into a designated category.

Therefore, we have compiled a comprehensive list containing the aforementioned attributes to make the challenging decision of choosing the right harbor freight spot weld cutter simple.

Leave a Comment