10 Best Hotwire Cutter For Styrofoam (2022 Reviews)

These best hotwire cutter for styrofoam enable you to cut items smoothly. Most of the products reviewed here are designed to use for multiple purposes.

A hotwire cutter for styrofoam is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is highly versatile, lightweight, and heavy-duty, have traditional wheels and ever-so-effective rocker blades.

All you need is to place the cutting material and then run the cutter on it. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

Top 10 Best hotwire cutter for styrofoam in 2022

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the hotwire cutter for styrofoam to grab the best one.

1. 3 in 1 Hot Wire Foam Cutter [2021 NEW], OneSight Upgrade 18W High Power Styrofoam Knife Cutter Electric Hotwire Foam Cutting Tool, 100-240V /18W Heated Foam Carving Knife Kit

Features :

  • ☛【More Fast and Smooth Cutting】- All hot wire foam cutter tips can heat up quickly within 10s to reach temperature 100℃. The Hot knife can cut form board or foam block from any angle cleanly and smoothly, without any melt material, no sticky with tools, so effective so fast!
  • ☛【More Sturdy and Safe】- Upgrade electric foam cutter made of stainless steel and plastic material, super overheat protect. Design with ON/OFF switch and LED light, provide safe tips when using our foam cutter. No moving, no breaking, no taking apart problem.
  • ☛【More Convenient】- 3 in 1 Styrofoam Cutting Knife, Hot Wire Tip, Holing Tip, Engraver Tip, you can cut any shade you desired, also perfect for craft into your home, such as Halloween costumes. Quick change tips, easy to replace the wires or holing tips during using, convenient and saving time.
  • ☛【Product Usage】You can cut foam from any angle and craft your own masterpiece, such as Halloween Costumes, Handmade Practice, Even Model Making Lessons by kids at school. It is also perfect for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist, foam carving, art model making, DIY craft, foam block, pearl cotton, EPP, KT board, EPS and so on projects in home & school.
  • ☛【Product Usage Tips】- Though our hot wire foam cutter tips have safe design and overheat protection, we still would like you all have a pleasant during using. So please read our tips carefully before applying: 1)We suggest you have a rest if the foam cutter had worked for 30mins; 2)Before changing any tips, please turn off the switch and let hot knife cool.

2. Cooltop Hot Wire Foam Cutter kit,18W Styrofoam Knife Cutter Electric Hot Wire Foam Cutting Tool, Heated Foam Carving Knife Kit with Cleaning Pen…

Features :

  • 【Smooth and Efficient Cutting】- All hot wire foam cutter tips can heat up to temperature 100℃ within 10s. The Hot wire cutting pen can cut foam board or foam block from any angle smoothly and efficiently.
  • 【Sturdy and Safe Design】- Upgrade Styrofoam Cutter is made of stainless steel and plastic material with overheat protection. Designed with ON/OFF button and LED reminder light, it provides safe tips when using our foam cutter. No flopping, no breaking, no taking apart problem.
  • 【Easy to Use】- 3 in 1 Styrofoam Cutting pen, including Hot Wire Tip, Holing Tip, and Engraver Tip, you can cut any shade you desired. Also it is easy to replace the wires or holing tips during working, making the process convenient and time saving. The cleaning pen that we provides helps you clean the tips easily after cutting.
  • 【Wide Applications】- The cutting pen is hot enough to be applied on different kinds of materials, such as foam board, foam block, pearl cotton, EPP, KT board, EPS and so on. Suitable for foam carving, commercial artwork, advertisement design, art piece creation, DIY craft projects and Christmas Decor in home & school.
  • 【Product Usage Tips】- Though our hot wire foam cutter tips have safe design and overheat protection, please read our tips carefully before using: 1) We suggest you take a rest if the foam cutter had worked for 30mins; 2) Before changing any tips, please turn off the switch and let the hot knife cool down first.

3. Perfect Mini Electric Hot Foam Cutter 3 in 1 Kit – Guritta Hot Wire Styrofoam Cutting Knife, Heated Foam Carving Sculpting Tool, 100-240V Stainless Steel Wire Bowl Cutting Pen Engraver Tips

Features :

  • ✅ CRAFT DIFFERENT SHAPES WITH THREE TIPS – You can cut the form board or foam block from any angle and craft into your desired shape, such as Halloween costumes, handmade practice, even model making lessons by kids at school. It is also perfect for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist, foam carving, art model making, DIY craft projects in Home & School.
  • ✅ FAST, CLEAN AND SMOOTH CUTTING – All tips temperature tailored specially for polystyrene foam cutting, carving and write words on the foam. The cutter heats up quickly with pre-heat time: 30sec (Hotwire Tip), 60sec (Cutting Tip), 120sec (Engraver Tip), and it can reach as high as 150℃ (Hotwire Tip), 210℃ (Cutting Tip), 350℃ (Engraver Tip). It cuts the Styrofoam smooth and fast, seals the edges clean, and leaves no debris.
  • ✅ CONVENIENT AND SAFE USE – Fantastic 3-in-1 multipurpose hot wire foam cutting tool with convenient quick-change tips 3 changeable tips: hot wire tip, engraver tip, and cutting tip. It also comes with a Metal Stand Holder for resting the heated needle (Most Foam Cutters Don’t Include It), so you don’t have to worry about where to rest it when you want a break from your work. The tool comes with electrical safety approved 5V adapter with handy on/off switch.
  • ✅ STRONG QUALITY AND COMFORTABLE GRIP – The hot wire tip, cutting tip, engraver tip are sturdy and very secure in the base. They are attached to the base firmly, and doesn’t bend much even carving through large pieces of Styrofoam. The handle is good thickness and non-slip, so you can get a full grip and won’t get strain for large projects.
  • ✅ 100% SATISFACTION, MONEY BACK GUARANTEE – Guritta team is always dedicated to developing effective and innovative products. To ensure that you receive a superior product with great results, we’re offering you new item with money back guarantee! If for any reason you are not satisfied with your purchase please message to us.

Additional Info :

Item Dimensions
Height 9.842519675
Width 1.181102361
Length 5.905511805
Weight 0.55

4. Hercules Hot Wire Foam Cutter Table with Foot Control Pedal – Tabletop Hotwire Cutter for Cutting, Forming and Sculpting Styrofoam and Other Foam Materials (Corded 110V AC)

Features :

  • 💪 With the Hercules 8500 DHWT you can cut and form all types of foam materials cleanly and safely every time. Small detail work is a breeze with the 8500 Series, making it perfect for gaming terrain and all types of foam model building.
  • 💪 The Hercules 8500 Series offers a wide variety of uses in everything from the packing industry, to the building and mechanical industry; it is perfect for architectural modeling and even set design for stage performances.
  • 💪 Adjustable temperature, up to 390 degrees, allows you to compensate for different types and thicknesses of foam and to precisely control your cutting speed. Also, The Hercules 8500 Series are the only hot wire cutting tables on Amazon that offers a foot control pedal for hands-free operation.
  • 💪 The working surface is made of a durable, non-stick aluminum co-cured compound that’s imprinted with an easy-to-read grid and protractor. The solid aluminum over-arm has a 13¾” throat and is 6″ high.
  • 💪 The 8500 DHWT is a 110/120 volt cutter with a standard North American Type-A plug that operates at a frequency of 50-60 Hz. The standard equipment includes a spool with cutting wire (Φ0.18mm, length 5m), an adjustable angle stop with an extension rail and a foot control pedal for hands-free operation.

Additional Info :

5. Hot Knife Foam Cutter Hot Wire Styrofoam Engraving Tip 3 in 1 Tools Kit by Calcor

Features :

  • 3 Tools In 1: Cut or Engrave Foam Complete Tool Set.
  • CONTAINS: Three Tools In One, 14w High Power Foam Cutter With UL Approved Power Suppl y and On / Off Safety Switch, 10cm Wand Style Hot Knife, 1 Cm Crafts Engraving Tip, 16cm Bow Hot Blade, Replacement Wire For Bow, Cutter Holder,
  • USES: Cuts Polystyrene, Pink Foam, Styrofoam With Ease. Custom Shape and Design Foam for Hundreds of Uses.
  • HOW TO: Heats Up In A Matter Of Seconds. Easy To Change Foam Cutting Tips, Simply Turn Off And Allow To Cool, Pull Foam Cutter Tip From Handle By Grabbing Black Plastic Base. Attach New Handle And Turn On.
  • TIPS: Allow The Cutter To Cut/Melt Into The Foam. Little To No Force Is Required To Cut Easily Through Foam. Don’t Force The Cutter

6. Foam Cutter, Jhua Hot Wire Knife Foam Cutter Electric Styrofoam Cutting Tool, 15W Foam Board Cutter with 4 inch Cutting Machine Pen for Styrofoam Foam Cutting, Arts, Crafts DIY

Features :

  • HEAT UP QUICKLY! – The hot knife foam cutter can heat the tube to 150°C/302℉ within 10 seconds.
  • ❤ NOTE: WATCH OUT FOR BURNS! KEEP AWAY FROM CHILDREN!
  • CLEAN & SMOOTH CUTTING! – Hot wire foam cutter cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris! You can cut the form board or foam block from any angle and craft into your desired shape.
  • STRONG & DURABLE! – The cutting pen/needle/rod is sturdy & very secure in the base, cuts and shapes quickly in any direction. The hot wires can bend to the shape you want, but only once otherwise it will break.
  • EASY TO USE! – One key switch, very convenient to switch electric foam cutter on and off.
  • ❤ NOTE: Recommended continuous use hot wire foam cutter’s time does not exceed 30 minutes.
  • WIDELY USE! – Ideal for low density styrofoam cutting, handmade practise, advertising words making, even kids model making. This hot pen will take you to a magical kingdom.

Additional Info :

Color Blue

7. WINONS Hot Wire Foam Cutter, WFC-0001 Polystyrene and Styrofoam Cutter Same as a Hot Knife Foam Cutter, Electric Carving Knife-Kit of 3 Tools

Features :

  • Package Includes: 6.6″ tensioner, 4.2″ wand-style, 1.3″ engraving tip, safety stand and replacement wire. Metrics for all the tools are sharpened with sheer vigilance to assist you with the most difficult cuts while enabling you to work on both large and small foam-based projects with ease.
  • Safety: In order to comply with the safety and sustainability standards our handle comes with a UL approved power supply and a secure power switch for safety purposes as the tips heat up quite fast
  • Practicality: Easily replaceable nozzles, overheat protection, equipped with a stand to place the heated needle for your safety and convenience
  • Enhancements: Rather than manufacturing a product from scratch, we improve our products by thoroughly analyzing the similar products available in the market, our tool incorporates a longer tip to be used as a saw for enhanced efficiency
  • Customer Care: We offer a lifetime money-back warranty for any pertinent issue reported and a 24/7 customer support for our valuable customers

Additional Info :

Color Dark Green
Item Dimensions
Height 1.2
Width 6.5
Length 8
Weight 0.61875

8. The Army Painter – GameMaster Hot Wire Foam Cutter – Hotwire Foam Cutting Tool and Styrofoam Cutter for Dungeon & Terrain and Wargames Scenery – Foam Board Cutter for Carving and Sculpting XPS Foam

Features :

  • NO MORE MESSY FOAM CUTTING- The Hot Wire Foam Cutter cuts through Polystyrene and XPS foam with accuracy and ease.
  • EASY TO OPERATE WITH ONE HAND – Simply press the activation button with your thumb and start cutting your styrofoam board.
  • MINIMAL FOAM BOARD LOSS – The 0.19mm thin heated hotwire allows for very fine levels of detail.
  • SAFETY PRECAUTIONS – The hot foam wire cutter can reach 300℃/572℉, allowing it to easily cut.
  • TRUSTED GAMER’S CHOICE – Ideal foam cutting tool for Dungeons and Dragon, Warhammer & Bolt Action

Additional Info :

Item Dimensions
Height 9.25195
Width 4.7244
Length 2.95275
Weight 2.46

9. Afantti Hot Wire Foam Cutter Knife Electric Styrofoam Cutter Tool Set | 5 Needle | Adjustable Voltage Regulator | for Foam Carving Cutting

Features :

  • 【5 Different Length Needles】Total 5 Needles: 5cm/10cm/15cm/20cm/25cm(2in/3.9in/5.9in/7.9in/9.8in); Shorter needles for detailed carving/sculpting; Longer needles for cutting.
  • 【Adjustable Voltage & Detachable Design】You need to adjust the voltage for differenct length needles; And with detachable design, you can easily change the needles.
  • 【High Temperature】The working temperature can get as high as 100-300°C/212-572°F, which makes cutting / carving foam smoothly.
  • 【Additional Metal Stand】Comes with a metal stand for resting the hot working needle, really helpful and also safer.
  • 【Wide Uses】Works for foams, styrofoam, EVA, rubber, etc. Good for DIY foam crafts and projects!

Additional Info :

Color Red 1

10. Hercules Hot Knife/Hot Pen Styrofoam Cutter – Hot Wire Foam Cutter and Styrofoam Sculpting Tool (1 Pen)

Features :

  • Professional model, heats up to 400°F within 10 seconds.
  • Easily cuts, shapes and sculpts styrofoam smooth and fast. Seals edges clean and leaves no debris! You can cut the foam board or foam block from any angle and craft into your desired shape.
  • LED Power indicator and on/off switch mounted on the handle instead of fumbling with the cord like other models
  • Includes metal safety stand for resting hot needles
  • Sturdy 2mm needle remains rigid when cutting and carving.

Additional Info :

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of hotwire cutter for styrofoam: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Cooltop Hot Wire Foam Cutter kit,18W Styrofoam Knife Cutter Electric Hot Wire Foam Cutting Tool,...
8.8
9.5
9
2 Hercules Hot Wire Foam Cutter Table with Foot Control Pedal – Tabletop Hotwire Cutter for Cutting,...
9.3
9.6
8.8
3 Perfect Mini Electric Hot Foam Cutter 3 in 1 Kit - Guritta Hot Wire Styrofoam Cutting Knife, Heated...
9.5
8.8
9
4 WINONS Hot Wire Foam Cutter WFC-0003, 18W (Max 22W) Versatile Styrofoam Cutter with Rotational...
9.7
9.1
9
5 Hercules Hot Knife/Hot Pen Styrofoam Cutter - Hot Wire Foam Cutter and Styrofoam Sculpting Tool (1...
8.9
9.8
9.6
6 The Army Painter - GameMaster Hot Wire Foam Cutter - Hotwire Foam Cutting Tool and Styrofoam Cutter...
8.9
9.6
9.1
7 Hot Knife Foam Cutter Hot Wire Styrofoam Engraving Tip 3 in 1 Tools Kit by Calcor
9.4
9.8
9.2
8 WINONS Hot Wire Foam Cutter, WFC-0001 Polystyrene and Styrofoam Cutter Same as a Hot Knife Foam...
8.9
9.6
9
9 Foam Cutter, Jhua Hot Wire Knife Foam Cutter Electric Styrofoam Cutting Tool, 15W Foam Board Cutter...
9
9.1
9.7
10 Afantti Hot Wire Foam Cutter Knife Electric Styrofoam Cutter Tool Set | 5 Needle | Adjustable...
9.2
9.2
9.6

 

How to Choose the Best hotwire cutter for styrofoam?

To help you pick the best hotwire cutter for styrofoam for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a hotwire cutter for styrofoam, it is something to prioritize during selection.
  • Foldable Design- If you need to carry hotwire cutter for styrofoam in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most hotwire cutter for styrofoam features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all hotwire cutter for styrofoam cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. hotwire cutter for styrofoams actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut hotwire cutter for styrofoam. Each of these types of cuts can shape how you position yourhotwire cutter for styrofoam, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most hotwire cutter for styrofoam are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic hotwire cutter for styrofoam if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated hotwire cutter for styrofoam. Hydraulic hotwire cutter for styrofoam is especially helpful if you’re trying to cut through thicker locks.

Size

hotwire cutter for styrofoam are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small hotwire cutter for styrofoam

Small hotwire cutter for styrofoam that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of hotwire cutter for styrofoam, such as the outstanding Knipex Tools hotwire cutter for styrofoam, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized hotwire cutter for styrofoam

Medium-sized hotwire cutter for styrofoam range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large hotwire cutter for styrofoam

Large hotwire cutter for styrofoam that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most hotwire cutter for styrofoam are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The hotwire cutter for styrofoam may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini hotwire cutter for styrofoam or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier hotwire cutter for styrofoam offers more metal-crushing force, but it causes fatigue over time. A lightweight hotwire cutter for styrofoam is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

Questions and Answers

  • Which cutters are best for electricians, according to #1?

Ans: Depending on your line of work, you could need a cutter that meets specified requirements. For instance, hotwire cutter for styrofoams with a needle-nose are used by electricians. They have tapered jaws that make it simple for them to bend wires and insert them into panels that are too small for any other type of cutter or plier to fit.

How should I pick a cutter?
  • Ans: When selecting a cutter, there are a few things to consider. Consider, for instance, the blade’s ability to cut, the handles’ length and insulation, the material from which they are formed, etc. Different hotwire cutter for styrofoam are used for various tasks. Choose the option that will enable you to complete your assignment with the very minimum amount of effort.
3. What distinguishes cutters from strippers?
  • Ans: Contrary to what their names might imply, cutters focus primarily on cutting, whilst wire strippers assist in removing the insulation.
4. If I cut a cable wire, would I get electrocuted?
  • Ans: There is a chance of electrocution while cutting a cable wire. Wire cutters include handles with rubber insulation to absorb such unforeseen shocks to reduce this risk.
5. For what purpose do cutters have holes?
  • The wire cutters’ holes make it easier to use small bolts and screws. To achieve this, one must thread a bolt or screw the correct length into the appropriate-sized hole. When the handles are squeezed together, the bolt or screw will have a clean trim without any damage to the threads.
6. How are heavy-duty cuts?
  • Ans: Working with heavy-duty job can be demanding and difficult. You need a variety of heavy-duty wire cutters to successfully cut heavy-duty wires in order to ease the difficulty of this challenging work.

The following is a list of some safety advice you can use when cutting through heavy-duty wires.

  • To protect your eyes, you must use eye protection. This will shield you from any mishaps and stop dust, debris, and other flying objects from getting in your eyes.
  • To ensure that the contact between the wire and the cutter is stable, cut the wire at an angle. This will stop any slippage-related mishaps.
  • In order to prevent the hotwire cutter for styrofoam from flying off your palm and landing somewhere else, you must firmly grasp the handle.
  • The hotwire cutter for styrofoam needs to be constantly oiled and lubricated to stay in top shape and cut wires effectively.
  • We have compiled a list of the various hotwire cutter for styrofoams that are offered on the market. Every one of the products listed is specifically made for its assigned function and falls into a designated category.

Therefore, we have compiled a comprehensive list containing the aforementioned attributes to make the challenging decision of choosing the right hotwire cutter for styrofoam simple.

Leave a Comment