Best Lowes Plasma Cutter To Cut Smoothly

These best lowes plasma cutter machines enable you to cut out a variety of items. And actually, many of them can be used for multiple purposes.

A lowes plasma cutter is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is a highly versatile, lightweight, and heavy-duty option, which is precious in an emergency and worthwhile in a lot of destruction and demolition jobs with its long handles and short blades.

All you need is to place the cutting material in two halves and then squeeze the cutter handles together. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

Top 10 Best lowes plasma cutter: Reviews with Features

1. Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)

Features :

  • 【Pilot Arc Function】This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
  • 【Dual-Voltage 110/220V】Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
  • 【Air Pressure & Air Compressor】The regulator and gauge are installed in front of the panel,you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
  • 【Post Time Function】With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
  • 【Cutting Thickness】The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

2. DEKOPRO 110/220V MMA Welder,160A ARC Welder Machine IGBT Digital Display LCD Hot Start Welder with Electrode Holder,Work Clamp, Input Power Adapter Cable and Brush

Features :

  • ★Advanced IGBT Inverter Technology:Powerful welder capable of welding mild steel, weld steel, stainless steel and cast iron. IGBT power device with unique control mode improves the reliability of welding machine
  • ★Professional ETL Certificate:The welding machine has ETL certificate for added safety. Each MMA welder device undergoes a strict inspection to ensure its reliability and efficiency. Built-in anti-stick, hot start and Excellent Arc stability.
  • ★Portable Design:This welder features a easy carrying handle,compact design, easy for translation and storage. Very convenient, can be used anywhere you need
  • ★Energy Efficient:Reduce the damage of Copper and Iron,obviously increase the welding frequency,and energy-conserving result is remarkable.Closed loop feedback control,the output voltage is stable,strong adaptability for electricity network.
  • ★Multi Use: The MMA welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials

Additional Info :

Item Dimensions
Weight 12.1

3. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display

Features :

  • 🛡️【High Quality】Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Auality Consumables
  • 🛡️【Portable Design】 Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle,It Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables
  • 🛡️【Dual Voltage】This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V/220V), Plug And Play In Different Environments, No External Conversion Plug Required
  • 🛡️【Application】This Is A Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm

Additional Info :

4. YESWELDER Plasma Cutter Torch Consumables, 24 Pcs Cutting Torch Nozzles Tips Kit For SG-55 AG-60 WSD-60.

Features :

  • HIGH QUALITY▶ Using high-quality materials, Provides premium strength and durability
  • APPLICATION ▶This consumables are suitable for AG-60 AG-60P SG-55 WSD-60 Cutting Torch ,use for CUT60,CUT60SP,CUT50DP ,CUT50PI,LGK-60 ,LTP 5000 etc plasma cutter
  • PACKAGE INCLUDED▶10 x -Extend Tip+10 x Electrodes+2 x protective cases+2 x isolation blocks
  • MATERIAL▶ Metal + Porcelain
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you’re not entirely satisfied, please just feel free to contact us at any time.

Additional Info :

5. 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine

Features :

  • 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • 🛡️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
  • 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • 🛡️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)

Additional Info :

Color Blue

6. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features :

  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
  • ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • PAPST Advanced German Cooling System
  • Max Severance Thickness: 3/4″
  • Max Cut Thickness: 1/2″

Additional Info :

Color Brown
Item Dimensions
Height 12
Width 6
Length 15
Weight 19.4
Release Date 2017-11-25T00:00:01Z

7. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Features :

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Additional Info :

8. ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine

Features :

  • 【High Efficiency & Energy Saving】– ZENY cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch; greatly makes the cutting consumables more endurable.
  • 【 110V or 220V Dual Voltage】– The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed.
  • 【Compact Design & Widely Applications】– This ZENY compact plasma cutter has a handle for portability. Easy taking.The net weight is 22.5LB. It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops.
  • 【Specification for Cutter Machine】– Voltage: 110/220V, 60HZ, 4.8KVA; Main Fuse: 16/22A; Current rage:20-50A; No-load Voltage:230V; Duty cycle: 60%; Efficiency:85%; Insulation class:F; Protection class: IP21S; Max cutting thickness:1-12mm

Additional Info :

Color Cut-50
Item Dimensions
Height 11
Width 14
Length 19

9. TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2″ Clean Cut

Features :

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2″ clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Portable: Auto-voltage adapts to 110 V – 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

10. Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive

Features :

  • 🔔★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
  • 🔔★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3″ Ideal Clean Cut And 2/5″ Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
  • 🔔★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual
  • 🔔★Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
  • 🔔★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.

Additional Info :

Color Orange Plasma Cutter
Item Dimensions
Height 12.99
Width 6.29
Length 15.35
Weight 9

List of lowes plasma cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine
9.7
9.5
9.5
2 Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display
9.1
9.7
9.5
3 Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional...
9
9.4
9.4
4 YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V...
9.8
8.9
9.8
5 Motor Guard M-30 1/4 NPT Submicronic Compressed Air Filter
9.1
9.4
9.2
6 Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit Cut40 50 with Plasma Cutter Torch PT31...
9.3
9.5
8.9
7 DEKOPRO 110/220V MMA Welder,160A ARC Welder Machine IGBT Digital Display LCD Hot Start Welder with...
9.7
9.6
9.5
8 Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting...
9.4
8.9
9.6
9 YESWELDER CUT-65DS 65A Non-Touch Pilot Arc Air Plasma Cutter Non High Frequency arc starting,...
9.2
9.5
9.8
10 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT...
8.9
8.8
9.1

How to Choose the Best lowes plasma cutter?

To help you pick the best lowes plasma cutter for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a lowes plasma cutter, it is something to prioritize during selection.
  • Foldable Design- If you need to carry lowes plasma cutter in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most lowes plasma cutter features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all lowes plasma cutter cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. lowes plasma cutters actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut lowes plasma cutter. Each of these types of cuts can shape how you position yourlowes plasma cutter, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most lowes plasma cutter are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic lowes plasma cutter if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated lowes plasma cutter. Hydraulic lowes plasma cutter is especially helpful if you’re trying to cut through thicker locks.

Size

lowes plasma cutter are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small lowes plasma cutter

Small lowes plasma cutter that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of lowes plasma cutter, such as the outstanding Knipex Tools lowes plasma cutter, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized lowes plasma cutter

Medium-sized lowes plasma cutter range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large lowes plasma cutter

Large lowes plasma cutter that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most lowes plasma cutter are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The lowes plasma cutter may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini lowes plasma cutter or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier lowes plasma cutter offers more metal-crushing force, but it causes fatigue over time. A lightweight lowes plasma cutter is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

 

Leave a Comment