Which Is The Best Metal Conduit Cutter Today?

There are lots of different kinds of cutters out there for all sorts of different needs. While each can be the best cutter for a particular task, you need to make sure that you’re getting the one that matches your needs. But first, let’s talk about what a metal conduit cutter actually is.

The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.

Today, we have for you a selection of the best metal conduit cutter tools that you can buy this year. And to make sure that you settle on just the right device, we’ve even included a handy buyers’ guide at the end.

List of 10 Best metal conduit cutter: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the metal conduit cutter to grab the best one.

1. Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter, Cut Flexible Conduit and Armored Cables, with Storage for Extra Blades

Features :

  • Cable Cutter easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle
  • Sharp cutting blade eliminates burrs
  • Depth of cut adjusts between standard MC and reduced diameter MC to prevent cable nicks
  • Comes with one blade stored in handle for convenience
  • Holds up to six replacement blades in handle
  • Use with Klein Tools replacement blade Cat. No. 53726SEN

Additional Info :

Color Black
Item Dimensions
Height 8
Width 12
Length 24
Weight 1.36

2. Klein Tools 88904 Professional Tube Cutter

Features :

  • Accurate 4 roller tracking system – no spiraling
  • Professional reaming tool
  • Extra cutting wheel included; simply remove screw in the back and open the handle to access
  • Replacement cutting wheel available (Cat. No. 88905)

Additional Info :

Item Dimensions
Height 1.25
Width 3
Length 6.5
Weight 1.3

3. AMZCNC Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hole Cutter Set KO Tool Kit Metal Sheet Puncher (8TON(1/2″~2″))

Features :

  • Powerful 8 US TRUE TON Punching Capacity. Head can be freely selected 360°,Compatible with GREENLEE and other domestic punch tooling 3/4″-16 threads.
  • 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2″
  • Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.

Additional Info :

4. RIDGID 32573 Model 118 2-in-1 Close Quarters AUTOFEED 1/4″ to 1-1/8″ Metal Tubing Compact Cutter, Silver/Black

Features :

  • METAL TUBING COMPACT CUTTER: Makes it quicker and easier to cut copper, brass, and aluminum tubing with a capacity of 1/4 in. to 1-1/8 in. in tight spaces that restrict rotation by hand
  • 2-IN-1 DESIGN: Allows the innovative cutter to be used alone or with the included easily attachable ratchet handle for superior flexibility and mobility
  • ERGONOMIC HANDLE: Rugged, compact, and lightweight and attaches to the cutter to operate in ratchet steps as small as 10 degrees, allowing for fine indexing in tight areas
  • CONVENIENT AND EFFICIENT: Features a high-quality steel constructed long-life cutter wheel with a spare wheel stored in the knob
  • SIMPLE TO OPERATE: Football-shaped knob is easy to turn and only requires tightening once while the spring-loaded cutter wheel makes cuts automatically for ease of use and labor in hard-to-reach areas

Additional Info :

Color 1
Item Dimensions
Height 2
Width 6.75
Length 13
Weight 1.10231131

5. Hydraulic Hand Hole Puncher Tools Hole Making Tools 1/2 to 2 inch Electrical Conduit Hole Cutter Metal Sheet Punching Tool

Features :

  • 1.With 7 Ton force for easy punching,even in 0.14 inch mild steel.
  • 2.Include with 1/2″,3/4″,1″,1 1/4″, 1 1/2″,2″ punch dies.
  • 3.Made of aluminum alloy with light weight,design for portable and fast work,make one-person operation easily
  • 4.Allow unlimited driver orientation to simply access to work.

6. IBOSAD Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hole Cutter Set KO Tool Kit Metal Sheet Puncher

Features :

  • 1/2″,3/4″,1″,1 1/4″, 1 1/2″,2″ punch dies
  • Develops 66KN of hydraulic force for easy punching,even in 3.5mm mild steel
  • Allow unlimited driver orientation to simplify access to work area.
  • Lightweight design for portable and fast work,make one-person operation easier

7. IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

Features :

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head

Additional Info :

Color Black
Item Dimensions
Height 12
Width 8
Length 10
Weight 0.01

8. Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

Features :

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall)
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction.
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts
  • Knockout Hole Punch, die size: 1/2″, 3/4″, 1″ and 1-1/4″, hole punch size: 7/8″, 1-3/32″, 1-11/32″ and 1-11/16″
  • Easy to use drive-bolt design uses several turns of a wrench to apply pressure

9. Flexzion Tube Cutter, Heavy Duty Tubing Pipe Cutter, 3/16 to 1-1/4 inch Cutting Diameter, Ideal for Cutting Copper, Aluminum, Brass, Steel, Plastic and More

Features :

  • Applicable to copper, stainless steel, aluminum, PVC tube. Cuts cleanly with no thread
  • Ergonomic knob provides better grip, allowing you to easily control the cutting pressure
  • Cutting diameter: 3/16″ to 1-1/4″ (5mm-32mm); Grooved rollers for close-to-flare cuts
  • Designed for smaller diameter tubing. Lightweight and compact form factor makes it easy to operate in confined spaces.
  • High strength aluminum alloy construction; Enclosed feed screw prevents clogging or jamming

Additional Info :

Item Dimensions
Height 4.2
Width 1.8
Length 8.5
Weight 0.7936641432

10. Mophorn 10 Ton 1/2″ to 2″ Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches)

Features :

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.
  • Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″), drilling holes from 0.86″ to 2.36″, fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 0.13″; Max thickness for stainless steel: 0.08″.
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts.
  • Wide Application: This manual metal stud punch tool can be used for professional equipment drilling, punching 11 Ga mild steel, iron plate, and also can be used for personal DIY, furniture installation, etc.

Additional Info :

Item Dimensions
Height 12
Width 6
Length 16
Weight 20

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of metal conduit cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Klein Tools 88904 Professional Tube Cutter
9
9.2
8.8
2 Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter, Cut Flexible Conduit and Armored Cables,...
9.1
8.8
8.8
3 UTZIKO Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 4 inch
9.1
9
9.6
4 RIDGID 32573 Model 118 2-in-1 Close Quarters AUTOFEED 1/4" to 1-1/8" Metal Tubing Compact Cutter,...
9.5
8.9
9
5 TOLESA Pipe Cutter Tools Heavy Duty Copper Tube Cutter 1/8 to 2 inch With Deburring Tool Inner-Outer...
9.7
9.1
9.5
6 Southwire 58282240 MCCUT BX/MC Rotary Cable Cutter with Lever
9.1
8.8
9
7 Ridgid - Midget Tubing Cutters - Cutting Cap.: 1/4" - 1-1/8"
9.5
9.8
9.3
8 Libraton Pipe Cutter, Tubing Cutter 3/16" to 2" Outer Diameter, Copper Pipe Cutter, Tube Cutter with...
9.6
9
9.7
9 WORKPRO Tubing Cutter, 1/8 to 1-1/8inch Tube Cutter, Heavy Duty Pipe Cutter for Thin Copper PVC...
9.1
8.8
9.8
10 Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch...
9
9.6
9.5

 

What to Consider When Choosing the Best metal conduit cutter

The Best metal conduit cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual metal conduit cutterare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“metal conduit cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

metal conduit cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual metal conduit cutter.

metal conduit cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals metal conduit cutter. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual metal conduit cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best metal conduit cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace metal conduit cutter Blade?

Nearly every warehouse has a cutter, often known as a metal conduit cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

metal conduit cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The metal conduit cutter

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our metal conduit cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the metal conduit cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The metal conduit cutter Back Together

We should now begin putting the metal conduit cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your metal conduit cutter will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the metal conduit cutter to ensure that it is at a comfortable resistance.

3 Features of a metal conduit cutter

The following characteristics are necessary for a heavy-duty metal conduit cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because metal conduit cutter with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your metal conduit cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a metal conduit cutter with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment