Best Mortise Cutter To Cut Smoothly

These best mortise cutter machines enable you to cut out a variety of items. And actually, many of them can be used for multiple purposes.

A mortise cutter is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is a highly versatile, lightweight, and heavy-duty option, which is precious in an emergency and worthwhile in a lot of destruction and demolition jobs with its long handles and short blades.

All you need is to place the cutting material in two halves and then squeeze the cutter handles together. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

Top 10 Best mortise cutter: Reviews with Features

1. Lumberjack Tools 1″, 1-1/2″ & 2″ Commercial Master Kit (CSK3), Black

Features :

  • DIY LOG FURNITURE KIT – Build log beds, end tables, chairs, coffee tables & more!
  • CUTS A 1″, 1-1/2″, and 2″ TENON DIAMETER
  • CREATES A 60° TAPERED SHOULDER – A 60° tapered shoulder is a common with traditional rustic furniture. It has a look similar to the tip of a pencil
  • DRILL REQUIREMENTS – Designed to run on a heavy-duty 1/2″, single-speed, high torque, low RPM (500 or less) corded drill
  • MADE IN USA

Additional Info :

Color Black
Item Dimensions
Height 9
Width 9
Length 9
Weight 9.8

2. From Tree to Table: How to Make Your Own Rustic Log Furniture (Fox Chapel Publishing) Practical Woodworking Information, Detailed Building Instructions, and Expert Troubleshooting Advice

Additional Info :

Item Dimensions
Height 9.9
Width 0.5
Length 8
Weight 1.2
Release Date 2019-01-21T00:00:01Z

3. Festool 574432 Domino Joiner DF 500 Q Set

Features :

  • NOTE: The DF 500 only come with the 5MM cutter which is installed.
  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement. Hose port diameter: 1.06 inch
  • Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life.
  • Precise Positioning – The Festool 574432 Domino Joiner DF 500 Q Set B004SETSXE comes with the following: Cross stop, Domino DF 500 7/32 (5mm) cutter, Open ended spanner WAF8, Trim stop in a systainer sys 2 T-Loc.
  • Routing Height Adjuster with Scale: 5-30 mm, Hose Port Diameter: 27 mm

Additional Info :

Color Black heavy duty long fiber plastic and metal
Item Dimensions
Height 6.4
Width 11.5
Length 15.5
Weight 13.28

4. Womens Wedge Espadrille Sandals Closed Toe Platform Lace Up Slingback Ankle Wrap Strap Sandals

Features :

  • Black wedge platform espadrille lace up ankle wrap strap sandals for women. Blue closed toe strappy wedge sandals for ladies.
  • Pink cute slingback comfortable jute wrap sole red summer wedges for girls. Beige round toe stylish summer sandals for ladies.
  • The ankle strap high heel sandals, comfortable for toes, suitable for dress, school, travel, office, holiday, walking and other occasions.
  • These wedge sandals are well match with your jeans, skirts, dress, shorts. Get in position with your look in the Coutgo sandals.
  • Please choose the right size referring to the size chart attached to the picture. Any problems please feel free to contact us,we will reply in 24 hours and help you solve the problems as soon as possible.

Additional Info :

Color Blue

5. Festool 574422 XL DF 700 Domino Joiner

Features :

  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels
  • Indexing pins for quick alignment against the edge of the work piece for accurate placement
  • Tenons up to approximately 5-1/2-Inch in length for large scale projects

Additional Info :

Item Dimensions
Height 11.5
Width 11.5
Length 16.5
Weight 1

6. Lumberjack Tools 2″ Industrial Log Tenon Cutter, Premium Tenon Cutter (TTA2000)

Features :

  • DIY log furniture tool – build log beds, end tables, chairs, coffee tables & more!
  • Cuts a 2″ Tenon diameter
  • Creates a 60° tapered shoulder – a 60° tapered shoulder is common with traditional rustic furniture. It has a look similar to the tip of a pencil
  • Drill requirements – designed to run on a heavy-duty 1/2″, single-speed, high torque, low RPM (500 or less) corded drill
  • Made in USA

Additional Info :

Item Dimensions
Height 8.5
Width 6.7
Length 6.8
Weight 3.8

7. Makita 7104L 10.5 Amp Chain Mortiser

Features :

  • Powerful 10.5 AMP motor (3,200 RPM) to quickly notch or cut holes in thick wood stock
  • Extremely portable at only 38.1 lbs.
  • Razor sharp chain for clean, accurate cutting
  • Cuts lap joints up to 5-1/8″”
  • Innovative power tool notches or cuts through-holes in thick wood stock quickly, neatly and accurately
  • Large adjustable vise and knob for attaching firmly onto logs 3-1/8″” to 12-1/8″” thick
  • Sliding rear clamp adjustable to desired width with a quick adjust tension knob
  • Clamp tension lever for a firm hold on log
  • Plunge depth adustment in 1/8″” increments
  • Cutting line indication plate
  • Adjust knob for re-adjusting position of chain across the log
  • Quick horizontal chain lever for widening holes
  • Chain tension adjustment cover with snap action
  • Durable plastic boot protects twin steel rails
  • Externally accessible carbon brushes for greater serviceability
  • Built-in carrying handle for ease of transportation
  • Ideal for timber framing or log home building
  • 23/32″” (18.25 mm) Cutter Chain (A-16570)
  • Sharpening Holder (123028-2)
  • Wrench (781204-0)
  • 100cc Oil Supply (182229-1)
  • Powerful 10.5-amp, 3,200 rpm motor
  • Extremely portable at only 37.4-pounds
  • Fast chain speed of 1,100 feet-per-minute
  • Externally accessible brushes for longer tool life
  • Adjusting levers and knobs for quick changes without resetting the tool

Additional Info :

Item Dimensions
Height 21.65
Width 22.64
Length 13.98
Weight 37.47858454

8. Lumberjack Tools 1″, 1-1/2″ & 2″ Home Master Kit (HSK3) , Red

Features :

  • DIY LOG FURNITURE KIT – Build log beds, end tables, chairs, coffee tables & more!
  • CUTS A 1″, 1-1/2″ & 2″ TENON DIAMETER
  • CREATES A RADIUS SHOULDER – A radius shoulder is a more refined, low profile shoulder
  • DRILL REQUIREMENTS – Designed to run on a heavy-duty 1/2″, single-speed, high torque, low RPM (500 or less) corded drill
  • MADE IN USA

Additional Info :

Color Red
Item Dimensions
Height 9
Width 9
Length 9
Weight 7.5

9. Big Horn 70125 Wood Door Lock Installation Kit, with Strike & Latch Mortiser Replace Templaco BJ-102-C3

Features :

  • Kit includes three Carbide Tipped Spur Bits for boring 1” edge-bore and 2-1/8” cross-bore and the 1-1/2” cross-bore for dead bolts along with a quick release adapt
  • Also includes Latch and Strike templates for a finish mortise.
  • Comes in a nice blow molded case.

10. Folded Flowers: Fabric Origami with a Twist of Silk Ribbon

Features :

  • Used Book in Good Condition

Additional Info :

Item Dimensions
Height 9.75
Width 0.57
Length 8.5
Weight 1.75047036028

List of mortise cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 PORTER-CABLE Router Bit, Hinge Mortising Cutter, 5/8-Inch (43698PC)
9.2
9.6
8.9
2 Souber DBB Mortiser Carbide Tipped Wood Cutter 1-1/4" (31.8mm)
9.8
8.9
8.9
3 Lumberjack Tools 1", 1-1/2" & 2" Commercial Master Kit (CSK3), Black
8.8
9.4
8.9
4 LuckyHigh 6pcs Square Hole Drill Bit Tools High Speed Steel HSS Woodworking Adjustable Mortise...
9.2
9.2
9.7
5 7Pcs Square Hole Drill Bit Sets, Woodworking Square Mortising Chisel Set Wood Square Hole Saw Sets...
9
9
8.9
6 Timber Tuff TMC-01TCFB 1" Tenon Cutter with Forstner Bit
9.4
9
9.6
7 Luckyway Door Lock Hole Opener Kit, Lock Mortiser for Wooden Doors.(Install/Change The Door Lock...
9.5
9.6
9.8
8 Lumberjack Tools 2" Industrial Log Tenon Cutter, Premium Tenon Cutter (TTA2000)
9.3
9.7
9.4
9 Flush Trim Mortise Template Router Bit Set of 1/4" Shank 1/2" Bearing, Woodworking Milling Cutter...
9.3
9.6
8.9
10 IRONWALLS Mortise Lock Jig, Door Lock Hole Opener Kit for Wooden Door with 3PCS Tungsten Steel...
9.5
9.2
9.4

How to Choose the Best mortise cutter?

To help you pick the best mortise cutter for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a mortise cutter, it is something to prioritize during selection.
  • Foldable Design- If you need to carry mortise cutter in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most mortise cutter features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all mortise cutter cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. mortise cutters actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut mortise cutter. Each of these types of cuts can shape how you position yourmortise cutter, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most mortise cutter are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic mortise cutter if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated mortise cutter. Hydraulic mortise cutter is especially helpful if you’re trying to cut through thicker locks.

Size

mortise cutter are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small mortise cutter

Small mortise cutter that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of mortise cutter, such as the outstanding Knipex Tools mortise cutter, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized mortise cutter

Medium-sized mortise cutter range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large mortise cutter

Large mortise cutter that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most mortise cutter are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The mortise cutter may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini mortise cutter or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier mortise cutter offers more metal-crushing force, but it causes fatigue over time. A lightweight mortise cutter is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

 

Leave a Comment