Choosing the right pipe chain cutter can make all the difference. Whether you’re looking for a precise and effective carving tool or need to cut any materials, have a look through our range of cutters to find exactly what you’re looking for.
Here we review the best pipe chain cutter, so you can choose the right cutter for any kind of your work.
List of 10 Best pipe chain cutter: Expert Recommendation
These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the pipe chain cutter to grab the best one.
1. RIDGID 42878 Model 238-P Powered Soil Pipe Cutter, 8-inch Chain Pipe Cutter
- Dual-powered tool operates using a 1/2-inch square drive impact driver or ratchet
- Cuts up to 8-inch soil pipe when used with an impact driver (minimum 200-ft-lbs) or 4-inch pipe manually with the included ratchet
- Compact, lightweight design allows tool to fit into tight places in overhead and below grade applications and easily mount in difficult places
- Easy to set up, the articulating outward facing chain hooks lay on the pipe to simplify latching
- Features two directional operation that allows scoring of the pipe for a clean cut
Additional Info :
2. RIDGID 69982 Model 226 In-Place Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter,Black/Red
- Compact and lightweight 17-inch tool designed to cut hub and NO HUB soil pipe in tight quarters
- Suitable for against-the-wall and other tight space applications
- Perfect for cutting cast iron, cement and clay pipe where space is limited
- Rotating hooks allow for fast, safe and easy latching
- Soil pipe cutter has a 1-1/2-inch to 6-inch (40 mm to 150 mm) pipe capacity
Additional Info :
3. RIDGID 32900 Model 246 Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter , Red
- Cuts 1-1/2-inch to 6-inch clay, cast-iron clay pipe or cement pipe and 4-inch Class 22 water main
- Ratchet-action handle operates parallel to the pipe allowing for application in minimum width trenches
- Complete with hand guard to protect operator’s knuckles when cutting
- Compatible Chain Extension Assembly (sold separately) can accommodate pipes up to 8-inches
- Pipe cutter has a 1-1/2-inch to 6-inch (40 mm to 150 mm) pipe capacity
Additional Info :
4. Grip-On 186-12 12-Inch Chain Pipe Cutter Locking Pliers, Heavy Duty in Orange Epoxy
- SPANISH MADE: high quality materials for an extremely durable tool
- PERFECT TRACKING: pipe cutters eliminate hand gripping effort and ensure perfect tracing
- EFFORTLESS CUTS: slices right through galvanized steel, steel copper PVC and aluminum
- HEAVY DUTY CHAIN: flexible chain is heat treated for longer life and has a capacity of up to 6-1/4″
- QUICK RELEASE: no pinch lever easily unlocks the pliers
Additional Info :
5. RIDGID 34403 Press Snap Soil Pipe Cutter, Chain Pipe Cutter And Cast Iron Pipe Cutter
- Chain pipe cutter compatible with RIDGID Standard Series pressing tools (CT-400, 320-E, RP 330-B, RP 330-C, or RP 340)
- Soil pipe cutter completes the cut in seconds without long, unruly lever arms
- Eliminates the need to score the pipe unlike most pipe cutters due to the chain design and hydraulic power of the RIDGID press tool with an easy grip and trigger action
- Soil pipe cutter with the capacity to cut 1-1/2 inch to 4 inch No Hub and Service Weight Soil Pipe – Sizes are indexed for ID (inner diameter)
- Includes Press Snap Soil Pipe Cutter, portable case and operator’s manual
Additional Info :
6. Steel Dragon Tools® 72037 6″ Tripod Pipe Chain Vise Stand Model 460 12R 300 700
- Steel Dragon Tools Model 460 portable tripod chain vise stand 460, 460-6, 72037, 36273
- Large vise base overhangs front legs for clear tool swing.
- Three (3) 1-1/2-inch by 41-inch steel legs with rubber mounts to eliminate sliding.
- Pipe Capacity: 1/8 in. to 6 in.
- Fits RIDGID 41020 Jaws, 41280 Jaw for Plastic Pipe, 40222 Jaw for Plastic Coated Pipe
Additional Info :
7. OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter
- CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters; Keep well oiled, not for use on stainless steel
- EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4″ to 3-1/4″ (19-83 mm); Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item
- EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps; Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut
- NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool; Work in cramped spaces with one-handed rotation; The cushion grip handles ease pressure on your hand while you increase your grip
- BUILT TO LAST: This quality metal pipe cutter’s cutting wheels won’t dull easily during use; The head of the exhaust cutting tool won’t bend from during rotation; Use as a copper and PVC pipe cutter; Lightly lubricate cutting wheels before use
Additional Info :
8. SMOTIVEPRO Exhaust Pipe Cutter Tailpipe Cutter 3/4 inch to 3 inch (19-76mm) Chain Muffler Pipe Cutter for Quiet Cutting, 14blades, Suitable for On and Off Vehicle Use
- To make safety and quick work on cutting exhaust pipe, SMOTIVEPRO Automotive Tool exhaust pipes and tailpipe cutter is simply the best solution for you. NOT FOR USE ON STAINLESS STEEL OR DOUBLE-WALL PIPES.
- This item features a cutting wheel on each of the rollers for smooth tracking and a cushioned grip handle for comfort,besides muffler pipe cutter minimizes noise. With the unique design, you won’t have to remove the exhaust from the car for cutting.
- The Tailpipe Cutter is a very useful tool designed especially for both on and off the car cutting of tailpipes and exhaust pipes with diameters ranging from 3/4 inch to 3 inch (19-76 mm). Each roller has a cutting wheel that provides smooth tracking.
- Whether you are a pro or “wannabe” weekend mechanic, this easy to use and functional car exhaust pipe cutter is a perfect add-on to your toolbox. Designed with quality and precision in mind, this top-notch product will come in handy to ensure that your exhaust system performs at its best, which is essential for your vehicle’s overall dependability and well-being.
- This Chain Exhaust Pipe Cutter is Manufactured utilizing the highest quality materials, strong, sturdy carbon steel that cannot be easily damaged and extremely durable.
9. MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black
- Easy to use.Powerful and robust
- Perfect for cutting exhaust pipes
- Coated Handles for Comfort. Designed to access where space is limited.
- Corrosion resistant.Suitable for cutting thin wall tubing up to 2.5mm Thick.
- 100% new quality and high quality
10. Powerbuilt 4 Piece Exhaust Pipe Tool Set, Repair Tailpipes, Expanders, Removing Dents, Chain Cutter, Nut Splitter, Import and Domestic Vehicles 648612
- Specialty tool kit makes it easier to repair and replace automotive exhaust pipes
- Includes chain style pipe cutter to make quick clean cuts in pipes up to 3-1/2″ diameter
- Includes pipe expander for making flanges and repairing dents
- Includes nut splitter to remove rusted and frozen nuts
- Durable storage case complete with usage instructions and photos
- Tool set for servicing exhaust systems
- Cuts pipe up to 3-1/2-Inch
- Use for pipe dent repair and pipe fitting
- Includes chain cutter, nut splitter and pipe expander
- Kit 42 includes 4-Piece for servicing exhaust systems
Additional Info :
List of pipe chain cutter: Comparison Table
|#||Product Name||Popularity Score||Quality Score||Sentiment Score||Sales Volume|
|1||GEARWRENCH Exhaust and Tailpipe Cutter - 2031DD||
|2||Grip-On 186-12 12-Inch Chain Pipe Cutter Locking Pliers, Heavy Duty in Orange Epoxy||
|3||RIDGID 69982 Model 226 In-Place Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter,Black/Red||
|4||Powerbuilt Tail Pipe Cutter, Cut Exhaust Pipe, Car Vehicle Specialty Tool, 6 Inches in Diameter -...||
|5||MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting...||
|6||ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool...||
|7||Exhaust Pipe Cutter Multi Wheel Chain Lock-grip Pliers Pipe Tube PCS Wrench Tool||
|8||RIDGID 42878 Model 238-P Powered Soil Pipe Cutter, 8-inch Chain Pipe Cutter||
|9||SMOTIVEPRO Exhaust Pipe Cutter Tailpipe Cutter 3/4 inch to 3 inch (19-76mm) Chain Muffler Pipe...||
|10||ARES 15009 - Exhaust Pipe Cutter - Cuts 3/4-Inch to 3 1/4-Inch Tailpipes and Exhaust Pipes - 15...||
What to Consider When Choosing the Best pipe chain cutter
The Best pipe chain cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual pipe chain cutterare effective. This section explains how to choose the best cutter.
Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:
- Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
- Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
- Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.
“pipe chain cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.
Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.
pipe chain cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual pipe chain cutter.
pipe chain cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.
Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.
You may not notice the characteristics and differences in the bases of different manuals pipe chain cutter. Larger tiles benefit from rubber feet and foldable sidebars.
It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.
Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.
Horizontal and angle rulers
Many of the greatest manual pipe chain cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.
Best pipe chain cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.
Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.
How To Replace pipe chain cutter Blade?
Nearly every warehouse has a cutter, often known as a pipe chain cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.
pipe chain cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!
Opening The pipe chain cutter
Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.
The actual number of parts in our pipe chain cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.
When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.
The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the
extra blades in the pipe chain cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.
Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.
Putting The pipe chain cutter Back Together
We should now begin putting the pipe chain cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your pipe chain cutter will then be in like-new condition when you tighten the screw back into place.
When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the pipe chain cutter to ensure that it is at a comfortable resistance.
3 Features of a pipe chain cutter
The following characteristics are necessary for a heavy-duty pipe chain cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.
Finger notch and grip
A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.
Spend a little more money to purchase a tool with a metal body because pipe chain cutter with a plastic body won’t be able to survive continuous use on the job site.
Easy blade change
Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your pipe chain cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a pipe chain cutter with a blade storage system.
Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.
Tool-Free Blade Changes
When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.