Which Is The Best Plasma Cutter On Today?

There are lots of different kinds of cutters out there for all sorts of different needs. While each can be the best cutter for a particular task, you need to make sure that you’re getting the one that matches your needs. But first, let’s talk about what a plasma cutter on actually is.

The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.

Today, we have for you a selection of the best plasma cutter on tools that you can buy this year. And to make sure that you settle on just the right device, weโ€™ve even included a handy buyersโ€™ guide at the end.

List of 10 Best plasma cutter on: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the plasma cutter on to grab the best one.

1. Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive

Features :

  • ๐Ÿ””โ˜…Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
  • ๐Ÿ””โ˜…50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2โ€ Ideal Clean Cut And 3/4โ€ Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3″ Ideal Clean Cut And 2/5″ Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
  • ๐Ÿ””โ˜…Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual
  • ๐Ÿ””โ˜…Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
  • ๐Ÿ””โ˜… HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.

Additional Info :

Color Orange Plasma Cutter
Item Dimensions
Height 12.99
Width 6.29
Length 15.35
Weight 9

2. Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown

Features :

  • โ˜… PORTABLE but POWERFUL–the Lotos LT3500 can easily cut up to 2/5โ€(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • โ˜… QUICK Setup–the per installed Air filter Regulator with NPT 1/4โ€ industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • โ˜… INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5โ€ ideal clean cut and 1/2โ€ maximum severance cut
  • โ˜… INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5โ€ ideal clean cut and 1/2โ€ maximum severance cut
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Additional Info :

Color Brown
Item Dimensions
Height 9
Width 5.5
Length 14

3. Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP Digital)

Features :

  • โ˜… PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5โ€ (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. โ˜… Non-HF–Non-HF Blowback Start, there is no HF interference.
  • โ˜… SETUP WITHIN 1 MIN–the per-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • โ˜…INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. โ˜…OUTPUT: 20-55 A DC output, 3/5โ€ ideal clean cut and 1โ€ maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. โ˜…SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… PACKAGE INCLUDES– power supply, blowback Non-HF start cutting torch, consumables, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator.
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Additional Info :

Item Dimensions
Height 12
Width 7.1
Length 16

4. Performance Tool W53992 Universal Mobile Welding Cart with Storage Trays on Wheels for MIG Welders and Plasma Cutters, Black

Features :

  • MANEUVERABLE: The 7-1/2″ back wheels and 3″ front swivel castors makes the welding cart very easy to move around
  • COMPATIBILITY: Fits most manufacturers MIG welders and plasma cutters
  • TWO SAFETY CHAINS: Help secure gas tanks when used with a MIG welders
  • STORAGE TRAYS: Two additional storage trays are ideal for keeping accessories and equipment
  • LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use

Additional Info :

Item Dimensions
Height 27.95
Width 14.17
Length 26.9
Weight 1.75

5. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features :

  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • โ˜… ๐’๐š๐Ÿ๐ž & ๐š๐ญ ๐‹๐จ๐ฐ ๐‚๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • โ˜… ๐Ž๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐ž๐ซ๐Ÿ๐จ๐ซ๐ฆ๐š๐ง๐œ๐ž: 10-50A DC output, 1/2โ€ ideal clean cut and 3/4โ€ maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.
  • โ˜… ๐๐š๐œ๐ค๐š๐ ๐ž ๐ˆ๐ง๐œ๐ฅ๐ฎ๐๐ž๐ฌ: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… ๐๐š๐ฉ๐ฌ๐ญ ๐€๐๐ฏ๐š๐ง๐œ๐ž๐ ๐‚๐จ๐จ๐ฅ๐ข๐ง๐  ๐’๐ฒ๐ฌ๐ญ๐ž๐ฆ: ensures the plasma cutter has a stable and durable high performance.โ˜… ๐ƒ๐ฎ๐š๐ฅ ๐•๐จ๐ฅ๐ญ๐š๐ ๐ž ๐ˆ๐ง๐ฉ๐ฎ๐ญ: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • PAPST Advanced German Cooling System
  • Max Severance Thickness: 3/4″
  • Max Cut Thickness: 1/2″

Additional Info :

Color Brown
Item Dimensions
Height 12
Width 6
Length 15
Weight 19.4
Release Date 2017-11-25T00:00:01Z

6. Lotos LTP8000 80 A Plasma Cutter with Pilot Arc Metal Cutter 220~240V, 1 inch Clean Cut, Brown

Features :

  • โ˜… CUT THICKNESS: Ideal Cut: 1″ Inch; Maximum: 1 1/2″ Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. โ˜… INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
  • โ˜…NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. โ˜… 2T/4T ENABLED: Release your finger for long time cutโ˜… THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000 Plasma Cutter are: BCON40 and BCON90. Please search “Lotos BCON40” or “BCON90”
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • โ˜… SETUP WITHIN 1 MIN: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • โ˜… PACKAGE INCLUDES: 70AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

Additional Info :

Color Brown
Item Dimensions
Weight 38
Release Date 2018-03-15T00:00:01Z

7. XT30 O-Ring Swirl Ring 249931 Tip Suit Miller Plasma Cutter XT40 on 375 625 X-TREME Cutting Machine Parts PK-37

Features :

  • Plasma Cutting Consumables Electrode x 10, Nozzle (30A) x 10, Swirl Ring x 2, O-Ring x 5
  • Reference Number: Electrode 249926, Tip 249927, O-Ring 249969, Swirl Ring 249931
  • Fit Miller XT30 Plasma Cutting Torch (on Miller Spectrum 375 X-TREME Plasma Cutter) or XT40 Plasma Cutting Torch (on Miller Spectrum 625 X-TREME Plasma Cutter)
  • Every Package Including: 37pcs Plasma Cutting Torch Consumables (Aftermarket Parts)
  • These products are made and sold by WSWeldingStop, not Miller original plasma kits

Additional Info :

8. Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2″ Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5” Max Cutting for Copper Alloy Mild Steel Aluminum

Features :

  • ๐Ÿ›’[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)ใ€30A breaker suggested for220V,50A breaker suggested for 110Vใ€‘
  • ๐Ÿ›’[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2″(12mm). Max Severance Thickness: 3/4″(16mm) Under 110V Clean Cut Thickness : 3/8 โ€˜โ€™(9mm) output current 30A.
  • ๐Ÿ›’[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty
  • ๐Ÿ›’[Voltage Transfer] Conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI.
  • ๐Ÿ›’[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]

Additional Info :

Color Green
Item Dimensions
Height 11
Width 9.8
Length 14.5
Weight 19.8

9. Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

Features :

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4″* (6.35 millimeters) with ease! *(Mild Steel)
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you’re cutting for smooth consistent clean cuts
  • LIGHT AND PORTABLE- Forney’s 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
  • RUGGED- All metal case. Built to take the day to day
  • MACHINE INCLUDES- Includes a 13′ cutting torch, 8′ ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125″ (384.18 millimeters) x 8.125″ (206.38 millimeters) x 12″ (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included)
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

Additional Info :

Color Green
Item Dimensions
Height 12
Width 8.13
Length 15.13
Weight 21.13
Release Date 2018-04-01T00:00:01Z

10. SUPRUS Lighter Electric Lighter Candle Lighter USB Lighter with Upgraded LED Battery Display Safety Switch Rechargeable Flameless Plasma Windproof Pocket Size for Candle Cooking BBQs Fireworks

Features :

  • ใ€TREBLE SAFETY DESIGNใ€‘ – Our lighter had passed CE, RoHS, UL test. Adopt the updated version of bonnet, which gives you treble protection, you have to push the safety lock switch first, then press the ignition switch to work. For the safety of consumer, the igniting spark will auto stop beyond 7 seconds per igniting. Restart the switch, the igniting spark will be re-ignited.
  • ใ€PORTABLE & CONVENIENT ใ€‘Wind & Splash Proof Design prevents the electric pulse produced from being blown out by strong wind, The lightweight design makes the lighter easy to carry and ideal for camping, BBQ ,hiking ,indoor and outdoor activitiess.
  • ใ€BATTERY NOTIFICATIONใ€‘This is the upgraded SUPRUS arc lighter which can display real time battery volume. When 4 LED lights on the barrel turn on, it is full charged.
  • ใ€BUTANE FREEใ€‘No more harmful butane. SUPRUS uses plasma tech to eliminate the need for this harmful chemical.During the ignition, there will be noise of โ€œ zee,zeeโ€, which is high-voltage power generation, please use with relax.
  • ใ€WHAT YOU GETใ€‘SUPRUS rechargeable lighter, USB charging cable, a gift box, a user manual and 24h friendly services.

Additional Info :

Color Black
Item Dimensions
Height 0.23228346433
Width 0.23228346433
Length 2.71259842243

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of plasma cutter on: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 XT30 O-Ring Swirl Ring 249931 Tip 40A Suit Miller Plasma Cutter XT40 on 375 625 X-TREME Cutting...
9.1
9.1
9.5
2 Professional Welding Cart with Storage Trays on Wheels Universal Mobile Plasma Cutter Machine...
9
9.2
8.8
3 SUPRUS Lighter Electric Lighter Candle Lighter USB Lighter with Upgraded LED Battery Display Safety...
9.6
9.8
9.4
4 Hoopty Dreams
9.6
9.6
9.6
5 Rain On The Window
9.7
9.5
9.4
6 A Welder's Handbook to Robotic Programming
9
9.3
9.8
7 YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V...
9.4
9.3
9.7
8 MIG TIG ARC Welder Plasma Cutter Durable Cart with 370 Lbs Weight Capacity 3 Shelves Cable and Gas...
8.8
9
9.4
9 Wall Art Decal Quotes Clipart-Vinyl Cutter Plotter Images-Vector Clip Art Graphics CD
8.8
8.9
9.6
10 Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60...
8.8
9.2
9.2

ย 

What to Consider When Choosing the Best plasma cutter on

The Best plasma cutter on saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual plasma cutter onare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“plasma cutter on” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

plasma cutter on beds are also crucial. There are some specific characteristics that can improve the usability of your manual plasma cutter on.

plasma cutter on have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals plasma cutter on. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual plasma cutter on have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best plasma cutter onhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace plasma cutter on Blade?

Nearly every warehouse has a cutter, often known as a plasma cutter on. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

plasma cutter on are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The plasma cutter on

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our plasma cutter on is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the plasma cutter on handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The plasma cutter on Back Together

We should now begin putting the plasma cutter on back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your plasma cutter on will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the plasma cutter on to ensure that it is at a comfortable resistance.

3 Features of a plasma cutter on

The following characteristics are necessary for a heavy-duty plasma cutter on. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because plasma cutter on with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your plasma cutter on blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a plasma cutter on with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. Itโ€™s also why several of our tools look different from anything else youโ€™ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you donโ€™t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment