Top 10 Best Plasma Cutter Table In 2022

Once you’ve tried a plasma cutter table, you never go back. Best plasma cutter table can make any work easier, especially when dealing with a lot of cutting. Best plasma cutter table can be used by anyone including crafters, teachers, construction workers, or just about anyone who cuts. You will want to consider the size and shape of your best cutter when making a purchase.

Choosing the right plasma cutter table can make all the difference. Whether you’re looking for a precise and effective carving tool or need to cut any materials, have a look through our range of cutters to find exactly what you’re looking for.

Here we review the best plasma cutter table, so you can choose the right cutter for any kind of your work.

List of 10 Best plasma cutter table: Editor’s Choice

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the plasma cutter table to grab the best one.

1. Eastwood Plasma Cutting Table Sturdy Carbon Steel Construction Workbench Table for Workshop Supports Up to 250 Lbs

Features :

  • Metal-Fabricating Jobs Are Easier When You Use Eastwood’S Plasma Cutting Table.
  • Sturdy, Carbon Steel Construction
  • Supports Up To 250 Lbs.
  • 23 Replaceable Slats
  • 32 in.H X 21 in.W X 30 in. L

Additional Info :

Color Black
Item Dimensions
Height 32
Width 21
Length 30
Weight 54

2. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features :

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Additional Info :

Item Dimensions
Height 19
Width 11
Length 20

3. Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2″ Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5” Max Cutting for Copper Alloy Mild Steel Aluminum

Features :

  • ๐Ÿ›’[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)ใ€30A breaker suggested for220V,50A breaker suggested for 110Vใ€‘
  • ๐Ÿ›’[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2″(12mm). Max Severance Thickness: 3/4″(16mm) Under 110V Clean Cut Thickness : 3/8 โ€˜โ€™(9mm) output current 30A.
  • ๐Ÿ›’[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty
  • ๐Ÿ›’[Voltage Transfer] Conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI.
  • ๐Ÿ›’[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]

Additional Info :

Color Green
Item Dimensions
Height 11
Width 9.8
Length 14.5
Weight 19.8

4. Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

Features :

  • โ˜… PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5โ€ (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
  • โ˜… CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
  • โ˜… SETUP WITHIN 1 MIN–the per-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • โ˜…INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. โ˜…OUTPUT: 20-55 A DC output, 3/5โ€ ideal clean cut and 1โ€ maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. โ˜…SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

5. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features :

  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • โ˜… ๐’๐š๐Ÿ๐ž & ๐š๐ญ ๐‹๐จ๐ฐ ๐‚๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • โ˜… ๐Ž๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐ž๐ซ๐Ÿ๐จ๐ซ๐ฆ๐š๐ง๐œ๐ž: 10-50A DC output, 1/2โ€ ideal clean cut and 3/4โ€ maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.
  • โ˜… ๐๐š๐œ๐ค๐š๐ ๐ž ๐ˆ๐ง๐œ๐ฅ๐ฎ๐๐ž๐ฌ: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… ๐๐š๐ฉ๐ฌ๐ญ ๐€๐๐ฏ๐š๐ง๐œ๐ž๐ ๐‚๐จ๐จ๐ฅ๐ข๐ง๐  ๐’๐ฒ๐ฌ๐ญ๐ž๐ฆ: ensures the plasma cutter has a stable and durable high performance.โ˜… ๐ƒ๐ฎ๐š๐ฅ ๐•๐จ๐ฅ๐ญ๐š๐ ๐ž ๐ˆ๐ง๐ฉ๐ฎ๐ญ: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • PAPST Advanced German Cooling System
  • Max Severance Thickness: 3/4″
  • Max Cut Thickness: 1/2″

Additional Info :

Color Brown
Item Dimensions
Height 12
Width 6
Length 15
Weight 19.4
Release Date 2017-11-25T00:00:01Z

6. APC-70HF, Professional 70 Amp Non-touch Pilot Arc Plasma Cutter, 1.2 inch Clean Cut, 80% Duty Cycle, 90V to 300V Wide Voltage Cutting Machine

Features :

  • APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

Additional Info :

Color Grey
Item Dimensions
Height 15.7
Width 8.7
Length 19.7
Weight 31

7. hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Features :

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220Vยฑ15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine)
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure

8. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Features :

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow๏ผšWhen you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability๏ผš10-55 A DC output, 1/2โ€ideal clean cut and 3/4โ€maximum severance cut under 220/240V๏ผŒ60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable๏ผšAllows for connection to 110- or 220-volt receptacles without tools๏ผŒPortable in the shop or at the job siteโ€”at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety๏ผšCertificated by ETL๏ผŒAutomatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Additional Info :

9. 2021 PowerPlasma 52i 50 Amp CNC compatible plasma cutter

Features :

  • Redesigned new PowerPlasma 52i model with NEW upgraded IPT-60 torch
  • NEW! Gouge Function. 50 Amps of professional cutting power
  • Blow-back start technology, Pilot Arc / 110/220v Dual Voltage
  • CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION
  • Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life

Additional Info :

Item Dimensions
Height 0
Width 0
Length 0
Weight 0

10. 2021 PowerPlasma 82i 80 Amp CNC compatible plasma cutter

Features :

  • LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch
  • IGBT Infineon Modules / Inverter technology
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor)
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″

Additional Info :

Color Green
Item Dimensions
Height 0
Width 0
Length 0
Weight 60

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of plasma cutter table: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Eastwood Plasma Cutting Table Sturdy Carbon Steel Construction Workbench Table for Workshop Supports...
9.5
9.2
9
2 Plasma Grill - Water table for hand held plasma cutters - With Cutting Slats
9.1
9.7
8.8
3 Plasma Cutter Table - Water table for hand held plasma cutters - w/Slats
9.6
9.2
9.7
4 STV Motorsports SparX510 5x10 CNC Plasma Cutting Table - Made in the USA
9.4
8.8
8.8
5 Baileigh PT-22 CNC Plasma Cutting Table
8.8
9.6
9.5
6 PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year...
9.5
9.7
9.1
7 SHUANGBING WELDER Portable CNC Machine with THC for Oxyfuel and Plasma Cutting (63" x 98")
9.3
9
9.6
8 Plasma Cutter, 50A Non-Touch Pilot Arc Inverter DC Inverter 120/240V Dual Voltage Cutting Machine...
9.5
9.1
8.9
9 SPRIGHOLLY Plasma cutting 50Amp Non Touch Pilot Arc plasma cutter 110V/220V Dual Voltage IGBT High...
8.8
9.3
9.4
10 Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean...
8.8
8.9
9.1

ย 

What to Consider When Choosing the Best plasma cutter table

The Best plasma cutter table saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual plasma cutter tableare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“plasma cutter table” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

plasma cutter table beds are also crucial. There are some specific characteristics that can improve the usability of your manual plasma cutter table.

plasma cutter table have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals plasma cutter table. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual plasma cutter table have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best plasma cutter tablehave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace plasma cutter table Blade?

Nearly every warehouse has a cutter, often known as a plasma cutter table. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

plasma cutter table are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The plasma cutter table

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our plasma cutter table is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the plasma cutter table handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The plasma cutter table Back Together

We should now begin putting the plasma cutter table back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your plasma cutter table will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the plasma cutter table to ensure that it is at a comfortable resistance.

3 Features of a plasma cutter table

The following characteristics are necessary for a heavy-duty plasma cutter table. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because plasma cutter table with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your plasma cutter table blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a plasma cutter table with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. Itโ€™s also why several of our tools look different from anything else youโ€™ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you donโ€™t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment