Choosing the right rubi slim system cutter can make all the difference. Whether you’re looking for a precise and effective carving tool or need to cut any materials, have a look through our range of cutters to find exactly what you’re looking for.
Here we review the best rubi slim system cutter, so you can choose the right cutter for any kind of your work.
| # | Preview | Product | Score | |
|---|---|---|---|---|
| 1 |
 |
Rubi SLIM CUTTER PLUS Cutting… |
8.30 |
Buy on Amazon |
| 2 |
 |
Rubi 18911 Cutting System Thin |
9.90 |
Buy on Amazon |
| 3 |
 |
RUBI TOOLS Slim System Easy… |
9.00 |
Buy on Amazon |
| 4 |
 |
RUBI TOOLS TZ-1300 Tile Cutter |
9.55 |
Buy on Amazon |
| 5 |
 |
Rubi Tools TX-1020 MAX with… |
9.85 |
Buy on Amazon |
| 6 |
 |
Rubi Tools 36 inch Wet… |
8.30 |
Buy on Amazon |
| 7 |
 |
Rubi Tools SLIM Breaker |
7.90 |
Buy on Amazon |
| 8 |
 |
Rubi Tools DU-200 EVO 650… |
8.80 |
Buy on Amazon |
| 9 |
 |
Rubi Tools 5 pcs Wheel… |
8.30 |
Buy on Amazon |
| 10 |
|
RUBI TOOLS TZ-1550 Tile Cutter |
8.15 |
Buy on Amazon |
List of 10 Best rubi slim system cutter: Editor’s Choice
These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the rubi slim system cutter to grab the best one.
1. Rubi SLIM CUTTER PLUS Cutting System 18959
Features :
- designed for cutting porcelain sheets with formats greater than 10ft x 3ft (300 cm x 100 cm) and with thicknesses of 0.11″ to 0.39″ (3 to 10 mm)
- The set consists of 3 guides of 43″ inches (110 cm); 1 scoring trolley handle with Ø22 mm EXTREME roller (ref. 01901); 1 separating pliers; 3 fixing suction cups, and a reinforced nylon carry bag
- The guides are made of aluminum and are assembled to guarantee a perfect scratch, always .39″ inches (1 cm) from the edge of the guide itself
- The pliers are in charge of separating the plates after scratching, allowing us to work with materials up to 10 mm thick. For pieces with thicknesses from 0.39″ to 0.59″ (11 to 15 mm), the use of the SLIM SEPARATOR (ref. 18917) is recommended
- Working with the SLIM CUTTER PLUS is very simple and offers us a manual cutter solution with guarantees for working with this type of plate
Additional Info :
| Item Dimensions | |
| Weight | 16.6008083286 |
2. Rubi 18911 Cutting System Thin
Features :
- Sold on Amazon
- Cutting capacity of 310cm. extendable as required with additional guides.
- With silicone cords incorporated in the guides at its base & the fixing suction pads, the SLIM SYSTEM guarantees accurate straight cuts without deviation.
- Separation system, by means of adjustable pincers, which ensure a gradual separation of the tile, thus reducing risk of breakage.
- The set consists of:
Additional Info :
| Item Dimensions | |
| Height | 47.0078739678 |
| Width | 5.511811018 |
| Length | 8.0708661335 |
| Weight | 15.211896078 |
3. RUBI TOOLS Slim System Easy Trans
Features :
- Sold on Amazon
Additional Info :
| Item Dimensions | |
| Height | 5.905511805 |
| Width | 5.905511805 |
| Length | 62.99212592 |
| Weight | 36.596735492 |
6. Rubi Tools 36 inch Wet Tile Saw DT-10IN Max
Features :
- 36 inch rip cut and 25 inch diagonal cut will allow users to manage large tile with ease
- Powerful 15 amp motor to cleanly cut through the toughest tile
- The Python cooling system’s adjustable height brings water directly to the cut for improved blade cooling and a cleaner cut
- Included components: Bare-Tool
Additional Info :
| Item Dimensions | |
| Height | 48.4 |
| Width | 36.8 |
| Length | 63 |
7. Rubi Tools SLIM Breaker
Features :
- To separate thicknesses up to 15mm
- Soft-grip handle for a better comfort and ergonomic
- With width adjustement system, to achieve an equal, uniform and symetric distribution of breaking forces when cutting narrow stripes
- Minimum narrow strip separator can cut is 4 cm
- For long pieces, it is recommended to use two SLIM separators working at the same time from both ends to cut the tile
Additional Info :
| Item Dimensions | |
| Weight | 1.10231131 |
8. Rubi Tools DU-200 EVO 650 Rail Saw (26″ Cut) 8″ Diamond Blade
Features :
- Motor assembly mounted on sliding bearings and foldable for miter cuts
- With lateral stop for repetitive cuts and adjustable square from 0 to 45°
- Direct drive motor with thermal protector and reinforced chassis
- Corrugated tube to protect power cable and water pipe
- 26″ Straight Cut, 18″ Diagonal Cut
Additional Info :
| Item Dimensions | |
| Weight | 52.8 |
9. Rubi Tools 5 pcs Wheel Kit TS-MAX, TR-Magnet, Speed-Magnet Tile Cutter (1/4″ 6mm, 5/16″ 8mm, 13/32″ 10mm, 3/4″ 18mm, 7/8″ 22mm)
Features :
- 1/4″ 6mm for regular tile
- 5/16″ 8mm for standard tile and porcelain
- 13/32″ 10mm for porcelain
- 3/4″ 18mm For granulated and difficult to cut porcelain tiles
- 7/8″ 22mm For sharp cuttings in hard ceramics
10. RUBI TOOLS TZ-1550 Tile Cutter
Additional Info :
| Item Dimensions | |
| Height | 11.81102361 |
| Width | 15.74803148 |
| Length | 3.93700787 |
List of rubi slim system cutter: Comparison Table
| # | Product Name | Popularity Score | Quality Score | Sentiment Score | Sales Volume |
|---|---|---|---|---|---|
| 1 | Rubi SLIM CUTTER PLUS Cutting System 18959 |
9.1
|
9.7
|
8.9
|
|
| 2 | Rubi 18911 Cutting System Thin |
9
|
9.6
|
9.8
|
|
| 3 | RUBI TOOLS Slim System Easy Trans |
9.7
|
8.9
|
9.4
|
|
| 4 | RUBI TOOLS TZ-1550 Tile Cutter |
9.1
|
9.1
|
9.5
|
|
| 5 | Rubi Tools SLIM Breaker |
9.8
|
9.6
|
8.8
|
|
| 6 | Rubi 5 pcs Wheel Kit TS/TR Tile Cutter (6mm, 8mm, 10mm, 18mm, 22mm) |
9.3
|
8.8
|
9.8
|
|
| 7 | RUBI TOOLS TZ-1300 Tile Cutter |
9.8
|
9.2
|
9.2
|
|
| 8 | Raizi Slim System Cutter for Large Format Porcelain Tile New upgrade 99% Success Rate |
8.9
|
9.3
|
9.3
|
|
| 9 | 14K Yellow Gold Plated CZ Stud Earrings Clear Ruby CZ Stud Ear Stud 4mm To 8mm |
9.7
|
9.2
|
9.1
|
|
| 10 | youkzuan Professional Porcelain Manual Tile Cutter,Glass Cutter Tool Kit with Large Tile Cutter,Tile... |
9.7
|
9.3
|
9.6
|
|
What to Consider When Choosing the Best rubi slim system cutter
The Best rubi slim system cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual rubi slim system cutterare effective. This section explains how to choose the best cutter.
Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:
- Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
- Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
- Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.
Material Cutters
“rubi slim system cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.
Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.
Cutter-Bed
rubi slim system cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual rubi slim system cutter.
rubi slim system cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.
Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.
Cutter base
You may not notice the characteristics and differences in the bases of different manuals rubi slim system cutter. Larger tiles benefit from rubber feet and foldable sidebars.
It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.
Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.
Horizontal and angle rulers
Many of the greatest manual rubi slim system cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.
Best rubi slim system cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.
Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.
How To Replace rubi slim system cutter Blade?
Nearly every warehouse has a cutter, often known as a rubi slim system cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.
rubi slim system cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!
Opening The rubi slim system cutter
Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.
Identifying Components
The actual number of parts in our rubi slim system cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.
When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.
Replacing Blades
The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the
extra blades in the rubi slim system cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.
Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.
Putting The rubi slim system cutter Back Together
We should now begin putting the rubi slim system cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your rubi slim system cutter will then be in like-new condition when you tighten the screw back into place.
When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the rubi slim system cutter to ensure that it is at a comfortable resistance.
3 Features of a rubi slim system cutter
The following characteristics are necessary for a heavy-duty rubi slim system cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.
Finger notch and grip
A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.
Metal body
Spend a little more money to purchase a tool with a metal body because rubi slim system cutter with a plastic body won’t be able to survive continuous use on the job site.
Easy blade change
Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your rubi slim system cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a rubi slim system cutter with a blade storage system.
Ergonomics
Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.
Tool-Free Blade Changes
When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.