The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.
Today, we have for you a selection of the best tomecanic tile cutter tools that you can buy this year. And to make sure that you settle on just the right device, we’ve even included a handy buyers’ guide at the end.
List of 10 Best tomecanic tile cutter: Tested by Experts
These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the tomecanic tile cutter to grab the best one.
1. Tomecanic Primo 12″ Tile Cutter
- Heavy duty steel base
- Includes precision score and snap replaceable wheel
- Cuts tile straight and at a 45 degree angle
- 12 inch Subway Tile cutter
Additional Info :
2. Tomecanic Primo Carbide Cutting Wheel, 834601
- Size 19/32″x 15/64″x 5/64″. (15 x 6 x 2 mm).
- Fits Primo 300 & 400 tile cutters.
3. MANTISTOL 13″ Pro Vinyl floor cutter LVT-330 for VCT,LVT, SPC, PVC, LVP, WPC and Rigid Core Vinyl Plank. (15.4 lbs)
- Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.
- No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar.
- Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank （SPC or RVP）, it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.
- 13″ cutting width and 8mm cutting depth. Straight cut, Angle cut; ” L & 凵” cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
- 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service life，man-made damage is not covered by the warranty.
Additional Info :
4. Montolit Masterpiuma Evolution 3 29″ Push Porcelain Tile Cutter 75P3
- Accurate and extremely powerful ergonomic push scrib handle
- Self adjustable patented scoring system consistently speeds up the cutting and splitting process
- Set-up, transport and storage are quick and easy, as the snap tile cutter doesn’t need to be dismantled.
Additional Info :
5. Sigma Pull Handle 26″ Tile Cutter 3B4
- The cutter comes with a measuring bar Which rotates 45 deg both in positive and negative Degree directions
- Engineered from solid aluminum alloy and steel
- Easy to use and extremely accurate, allowing them to be used on a variety of materials including glass mosaic, porcelain, pavers, quarry, saltio, as well as a variety of marble and granite tiles.
Additional Info :
6. PORTER-CABLE Wet Tile Saw (PCE980)
- Onboard miter square to help line up miter cuts and repeatable rip cuts
- Roll cage for easy carrying and protection of the cutting cart
- Splash guard keeps water from spraying the tool operator
- Stainless steel fixed deck holds up to water and jobsite abuse
- Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm
Additional Info :
7. MARSHALLTOWN Ultra-Lite Flooring Cutter 13″
- 13″ Lightweight Flooring Shear
Additional Info :
8. Montolit 63P3 Tile Cutter
- 63 cm, 44 x 44 cm, and 0 + 2 cm.
Additional Info :
9. Montolit Masterpiuma EVO3 Tile Cutter 36″ (93P3) (UNITS OF MEASURE IN INCHES)
- UNIT OF MEASURE IS IN INCHES
- Engineered for easy cutting all types of available ceramics, porcelain and glass tiles, including glass mosaic.
- Accurate and extremely powerful ergonomic push scrib handle. Recognized as the most effective lever on the tile cutter market.
- Set-up, transport and storage are quick and easy, thanks to the patented foldable design.
- This professional snap tile cutter doesn’t need to be dismantled.
10. Rubi TS-43 Max Manual Trimmer – Grey
- Ideal for heavy-duty cutting of ceramic tile Porcelain stoneware in general, and in particular, for the frequent Court (BIA) type
- Separator monopunto High Performance with 800 kg; maximum power of separation, specially designed for the cutting of high hardness materials and with a maximum thickness of 15 mm
- The separator includes the Smart Power by regulating the same power of separation according to the thickness of the tile thickness, using the maximum power in most materials
- Bi-material handles and large ergonomic design, top side for better support of the tile, and repetitive cutting accuracy; Reinforced base and great dimension
- With two chromed steel guides, straight and calibrated, anti-corrosión; Share rodeles Rubi Ø 6 – 22 mm; Includes: 2 rodeles (Ø 6 mm and Ø 10 mm) and carry case
Additional Info :
List of tomecanic tile cutter: Comparison Table
|#||Product Name||Popularity Score||Quality Score||Sentiment Score||Sales Volume|
|1||Tomecanic Primo 12" Tile Cutter||
|2||Tomecanic Primo Carbide Cutting Wheel, 834601||
|3||Montolit Masterpiuma Evolution 3 29" Push Porcelain Tile Cutter 75P3||
|4||Marshalltown 17" (432 mm) Tile Cutter,Multi,One Size,TC17||
|5||INGCO 24 Inch Manual Tile Cutter with 2Pcs Tungsten Carbide Blade High Leverage Handle for Precision...||
|6||youkzuan Professional Porcelain Manual Tile Cutter,Glass Cutter Tool Kit with Large Tile Cutter,Tile...||
|7||Sigma Pull Handle 26" Tile Cutter 3B4||
|8||Goldblatt 2 Piece Glass Tile Nippers Set - Heavy Duty Wheeled Glass Mosaic Nipper & Hd Ceramic Tile...||
|9||Montolit 63P3 Tile Cutter||
|10||Manual Tile Cutter, 2 in 1 Glass Tile Cutter Hand Tool with Glass Breaking Pliers, Mirror Cutting...||
What to Consider When Choosing the Best tomecanic tile cutter
The Best tomecanic tile cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual tomecanic tile cutterare effective. This section explains how to choose the best cutter.
Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:
- Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
- Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
- Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.
“tomecanic tile cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.
Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.
tomecanic tile cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual tomecanic tile cutter.
tomecanic tile cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.
Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.
You may not notice the characteristics and differences in the bases of different manuals tomecanic tile cutter. Larger tiles benefit from rubber feet and foldable sidebars.
It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.
Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.
Horizontal and angle rulers
Many of the greatest manual tomecanic tile cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.
Best tomecanic tile cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.
Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.
How To Replace tomecanic tile cutter Blade?
Nearly every warehouse has a cutter, often known as a tomecanic tile cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.
tomecanic tile cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!
Opening The tomecanic tile cutter
Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.
The actual number of parts in our tomecanic tile cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.
When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.
The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the
extra blades in the tomecanic tile cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.
Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.
Putting The tomecanic tile cutter Back Together
We should now begin putting the tomecanic tile cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your tomecanic tile cutter will then be in like-new condition when you tighten the screw back into place.
When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the tomecanic tile cutter to ensure that it is at a comfortable resistance.
3 Features of a tomecanic tile cutter
The following characteristics are necessary for a heavy-duty tomecanic tile cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.
Finger notch and grip
A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.
Spend a little more money to purchase a tool with a metal body because tomecanic tile cutter with a plastic body won’t be able to survive continuous use on the job site.
Easy blade change
Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your tomecanic tile cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a tomecanic tile cutter with a blade storage system.
Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.
Tool-Free Blade Changes
When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.