Which Is The Best Toro Timecutter Parts Today?

There are lots of different kinds of cutters out there for all sorts of different needs. While each can be the best cutter for a particular task, you need to make sure that you’re getting the one that matches your needs. But first, let’s talk about what a toro timecutter parts actually is.

The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.

Today, we have for you a selection of the best toro timecutter parts tools that you can buy this year. And to make sure that you settle on just the right device, we’ve even included a handy buyers’ guide at the end.

List of 10 Best toro timecutter parts: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the toro timecutter parts to grab the best one.

1. Toro 50″ TimeCutter SS & MX with Kawasaki V-Twin Engine Tune-Up Kit

Features :

  • Air Filter (Kawasaki Part 11013-0752)
  • 3 Blades (Toro Part 115-5059-03 / 79016P)
  • Kawasaki Oil Filter (49065-0724) with 2 U.S. Quarts Kawasaki KTech 10W40 oil (Part 99969-6296)
  • 2 Spark Plugs (NGK BPR4ES)
  • Fuel Filter (Kawasaki 49019-0027)

Additional Info :

Item Dimensions
Height 8
Width 6
Length 24

2. Toro 108-7895 Deflector

Features :

  • Deflector
  • 50″ cut

Additional Info :

Item Dimensions
Height 9
Width 17
Length 24
Weight 0.125

3. Toro 117-1197 Solenoid

Features :

  • Ships fast to Texas, Gulf and East Coast States!
  • Original oem part

Additional Info :

Item Dimensions
Weight 5

4. Genuine OEM Toro Part # 137-7046 Deflector; 2018 & Newer Model TImecutter SS 42″

Features :

  • Genuine OEM Toro Part # 137-7046 Deflector

Additional Info :

Color Black

5. 8TEN Deck Rebuild Kit for Toro Exmark 42 inch Quest TimeCutter SS 4235 MX 4260 ZS 4200S 4200T Blade Spindle Belt Idler

Features :

  • Blade Replaces OEM Part Numbers: Exmark 110-6568-03, Toro 110-6568-03
  • Spindle Replaces OEM Part Numbers: Exmark 117-7268, 117-7439, 121-0751, Toro 117-0751, 117-7267, 117-7268, 117-7439, 121-0751
  • Belt Replaces OEM Part Numbers: Toro 119-8819
  • Idler Replaces OEM Part Numbers: Exmark 106-2175, 132-9420, Toro 106-2175
  • Compatible with: Exmark Quest QT22KA421 (SN: 920000 & Above); Toro TimeCutter SS 4235 (2011-2014), TimeCutter SS 4260 (2011-2012), TimeCutter MX 4260 (2012-2013), TimeCutter ZS 4200S (2016),

Additional Info :

Item Dimensions
Height 8
Width 8
Length 24
Weight 13.5

6. Toro 79016P 50″ Timecutter 3 Blade Kit

Features :

  • Sold on Amazon

Additional Info :

Item Dimensions
Height 4
Width 4
Length 24

7. Toro 112-3951 Deflector

Features :

  • Deflector
  • 42″ cut

Additional Info :

Color Black
Item Dimensions
Height 13
Width 6
Length 19
Weight 1.14

8. The Mower Shop 50 in Toro TimeCutter SS & MX for Kawasaki V-Twin Engine Tune-Up Kit with Blade Set 79016P (115-5059-03)

Features :

  • Set of 3 Toro Blades (79016P/ 115-5059-03)
  • Kawasaki Air Filter (11013-0752) with 2 NGK spark plugs
  • Kawasaki Fuel Filter (49019-0031)
  • Kawasaki Engine Oil Filter (Substitutes for no longer available 49065-0721) and 2 U.S. Quarts Kawasaki KTech 10W40 oil (99969-6296)
  • The Mower Shop Date of Service Decal for record keeping

9. Toro 50″ TimeCutter SS, SW & SWX V-Twin Engine Tune-Up Kit

Features :

  • Toro Air Filter 136-7806 (Replaces 127-9252)
  • Set of 3 Toro Blades (115-5059-03/79016P)
  • Toro Fuel Filter 133-1563 (Replaces 127-9204)
  • Toro Engine Oil Filter 136-7848 (Replaces 120-4276)
  • 2 Spark Plugs (NGK BPR5ES) and 2 U.S. Quarts of Oil 10W30 (38280)

Additional Info :

Item Dimensions
Height 8
Width 6
Length 24
Weight 10

10. [TOR] [117-7461 KIT] Toro Timecutter Z Muffler 112-4024 Z4200 Z5000 108-7829

Features :

  • NEW Toro Timecutter Consumer Z Riding Lawn Mower Muffler
  • Kit includes Toro Muffer, Rubber Isolator, and Mounting Gasket!!!
  • Replaces Old part numbers: 108-7829 & 112-4024

Additional Info :

Color Black

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of toro timecutter parts: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Toro 108-7895 Deflector
9.5
9.5
9.2
2 Toro 50" TimeCutter SS & MX with Kawasaki V-Twin Engine Tune-Up Kit
9.5
9.1
9.4
3 Toro 117-1197 Solenoid
8.8
9
8.9
4 Genuine OEM Toro Part # 137-7046 Deflector; 2018 & Newer Model TImecutter SS 42"
9.4
9.5
9
5 12PK Lawn Mower Blades Compatible with 50" Toro Time Cutter Z TimeCutter Z5000 74370 74372 74373...
9.3
9.4
9.4
6 Toro 50" TimeCutter SS, SW & SWX V-Twin Engine Tune-Up Kit
9.6
9.6
9.7
7 Toro 79016P 50" Timecutter 3 Blade Kit
9.6
9.7
8.9
8 Genuine OEM Toro 42" Timecutter Mulching Blade Part # 117-5376-03 Qty. 2
8.8
9.5
9.1
9 The Mower Shop Tune Up Kit for 50 IN TimeCutter SS5000 (74637) and MX5050 (74770)
9.8
9.8
9.3
10 Genuine Toro Parts # 130-0736 Flat Free Caster Wheels; Toro Timecutter 2014 & Newer
9.4
8.8
9.5

 

What to Consider When Choosing the Best toro timecutter parts

The Best toro timecutter parts saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual toro timecutter partsare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“toro timecutter parts” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

toro timecutter parts beds are also crucial. There are some specific characteristics that can improve the usability of your manual toro timecutter parts.

toro timecutter parts have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals toro timecutter parts. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual toro timecutter parts have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best toro timecutter partshave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace toro timecutter parts Blade?

Nearly every warehouse has a cutter, often known as a toro timecutter parts. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

toro timecutter parts are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The toro timecutter parts

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our toro timecutter parts is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the toro timecutter parts handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The toro timecutter parts Back Together

We should now begin putting the toro timecutter parts back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your toro timecutter parts will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the toro timecutter parts to ensure that it is at a comfortable resistance.

3 Features of a toro timecutter parts

The following characteristics are necessary for a heavy-duty toro timecutter parts. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because toro timecutter parts with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your toro timecutter parts blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a toro timecutter parts with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment