Best Unistrut Cutter -Complete Buyer’s Guide

10 Best unistrut cutter: Top Seller

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the unistrut cutter to grab the best one.

1. Milwaukee Tools M18 Brushless Threaded Rod Screw Cutter 2872-20

Features :

  • Dies not included

2. Genuine UNISTRUT P1000T 1-5/8″ 12 Gauge Metal Strut Channel, Slotted Back, Pre-Galvanized Zinc 5 Foot Length

Features :

  • Genuine UNISTRUT Brand
  • 1-5/8″ x 1-5/8″ Square
  • 12 Gage Steel Strut Channel
  • 9/16″ x 1-1/8″ Short Slotted Back Channel
  • Silver Finish: Pre-Galvanized Zinc; ASTM A653

Additional Info :

Color Silver; Finish – Pre-galvanized Zinc
Item Dimensions
Height 1.63
Width 1.63
Length 60

3. DEWALT 20V MAX* Threaded Rod Cutter, Cordless (DCS350D1)

Features :

  • Able to cut 1/4″, 3/8″, 1/2″ mild steel Course threaded rod, and 1/4″, 3/8″ stainless steel Course threaded rod
  • Clean, Bur free cuts allowing for easy threading
  • Rotating cutter allows you to cut multiple sizes of rod with one cutter
  • Bright LED work light to illuminate cutting area
  • Onboard cutter wrench storage

Additional Info :

Item Dimensions
Height 7
Width 6
Length 13
Weight 9

4. EXCELFU 4 Wheel Trolley Assembly Roller Trolley Stable Welding for 1-5/8″ Wide and All 1-5/8″ or Taller Strut Channel, Pack of 2

Features :

  • High strength: 4 Wheel Trolley Assembly is made of solid steel, which ensures the high strength of the Wheel trolley. Galvanized zinc, rust protection
  • Stable performance: Wheel Trolley use deep groove ball bearings to make sure you can operate it smoothly without making any noise. The 4 bearing trolley assembly with a welded bearing and pin shaft to offer more stability for secure use
  • For use with: 4 wheel trolley assembly for use with 1-5/8″ Wide and All 1-5/8″ or Taller Strut Channel. Diameter Hole: 9/16″ (14mm), Thickness: 1/4″ (6mm), Design Load in 450 pound
  • Warm tips: If the height of the strut channel used with the Trolley Assembly is not enough, the trolley roller will encounter the mounting bolts inside the guide rail. It’s recommended that you use the strut channel horizontally
  • GUARANTEE: We offer 100% no risk money-back guarantee if you’re not satisfied with your purchase for any reason. So add your wheel trolley assembly to cart now

5. Klein Tools 89552 Hole Cutter, Adjustable Cutter from 2 to 12 Inch, Cuts 24 gauge Steel and 26 gauge Stainless

Features :

  • Cuts 2 to 12-Inch (51 to 305 mm) holes in sheet metal
  • For up to 24 gauge steel and 26 gauge stainless steel
  • Inch and centimeter measurement scales are molded into the body
  • Quality bearings assure a long cutting life
  • Installs into standard electric drill chucks
  • Includes replacement bit and L-Style Hex-Key to tighten the bit
  • Features an adjustable Pivot Point for accurate hole size

Additional Info :

Item Dimensions
Height 7.2
Width 4.3
Length 1.1
Weight 0.04375

6. Unistrut Clamping Nut 16 Threads 3/8 “

Features :

  • Strut Top Grip Clamping Nut
  • Size: 3/8
  • Spring nut
  • 16 threads
  • 5 per packSpecifications

Additional Info :

Item Dimensions
Height 6
Width 5
Length 0.8
Weight 0.5

7. Genuine Unistrut P1000 1-5/8″ 12 Gauge Steel Strut Channel, Solid Back, Pre-Galvanized Zinc 5 Foot Length

Features :

  • Genuine UNISTRUT Brand
  • 1-5/8″ x 1-5/8″ Square
  • 12 Gage Steel Strut Channel
  • Solid Back (No Perforations) Channel
  • Silver Finish: Pre-Galvanized Zinc; ASTM A653

Additional Info :

Color Silver; Finish – Pre-galvanized Zinc
Item Dimensions
Height 1.63
Width 1.63
Length 60

8. Genuine Unistrut P2750-EG 4 Wheel Light Duty Trolley Assembly for use with P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8″ or Taller Strut Channel

Features :

  • Genuine UNISTRUT Brand
  • 4 Wheel Light Duty Trolley Assembly
  • For use with: P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8″ or Taller Strut Channel
  • Clevis Material: 12 Gauge
  • Silver Finish: Electro-Galvanized Zinc; ASTM B633, Type III

Additional Info :

Color Silver; Finish – Electroplated Zinc
Item Dimensions
Height 1.72
Width 1.25
Length 3.13

9. Genuine Unistrut P2942-EG Narrow 2 Hole Square Mount Post Base Strut Mount for All 1-5/8″ Single Strut Channel

Features :

  • UNISTRUT SQUARE MOUNT – High-quality and built to last, this post base is the durable and versatile hardware solution for your project. It’s the perfect combination of maximum support and a professional finish.
  • SILVER FINISH – This durable and long-lasting strut channel is constructed of electro-galvanized zinc (ASTM B633, Type III). The pristine silver finish looks clean and professional if the channel is exposed in your finished project.
  • COMPATIBLE – Use this square mount with all 1-5/8″ Single Strut Channels.
  • DIMENSIONS – 1-5/8″ single channel, square mount post base. Thickness: 1/4” (6.4mm); 9/16″ diameter hole. Hole Spacing: (From End): 13/16″, (On Center): 1-7/8″.

Additional Info :

Color Silver; Finish – Electroplated Zinc
Item Dimensions
Weight 2.67

10. Genuine Unistrut P1377-EG 4 Hole”U” Shaped Splice Clevis Connector Bracket for All 1-5/8″ Strut Channel

Features :

  • Genuine UNISTRUT Brand
  • 4 Hole “U” Shaped Splice Fitting; Size = Depth of 1-9/16″
  • For Use With 1/2″ bolt in ALL 1-5/8″ Series Strut Channels
  • 9/16″ Diameter Hole; Thickness: 1/4″ (6mm)
  • Silver Finish: Electro-Galvanized Zinc; ASTM B633, Type III

Additional Info :

Color Silver; Finish – Electroplated Zinc
Item Dimensions
Height 1.8
Width 2.2
Length 7.3

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of unistrut cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 UNISTRUT N2558-10 Pipe CLAMP 1INCH
9.5
9.5
9.8
2 Milwaukee Tools M18 Brushless Threaded Rod Screw Cutter 2872-20
9.7
8.9
9.1
3 Genuine UNISTRUT P1000T 1-5/8" 12 Gauge Metal Strut Channel, Slotted Back, Pre-Galvanized Zinc 5...
8.8
9.4
9
4 Klein Tools 89552 Hole Cutter, Adjustable Cutter from 2 to 12 Inch, Cuts 24 gauge Steel and 26 gauge...
9.2
9.5
9.1
5 DEWALT 20V MAX* Threaded Rod Cutter, Cordless (DCS350D1)
9.8
8.9
9.5
6 Genuine Unistrut P2750-EG 4 Wheel Light Duty Trolley Assembly for use with P1000, P1001, P5000,...
9.4
9.4
9.6
7 EXCELFU 4 Wheel Trolley Assembly Roller Trolley Stable Welding for 1-5/8" Wide and All 1-5/8" or...
9
8.9
9.7
8 Unistrut Clamping Nut 16 Threads 3/8 "
9.3
8.9
8.9
9 DEWALT DCS377B ATOMIC 20V MAX* Brushless Cordless 1-3/4 in. Compact Bandsaw (Tool Only)
9.3
8.8
9.7
10 Makita XSC02Z 18V LXT® Lithium-Ion Brushless Cordless 5-7/8" Metal Cutting Saw, Tool Only
9.4
9
8.8

How to Choose the Best unistrut cutter?

To help you pick the best unistrut cutter for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a unistrut cutter, it is something to prioritize during selection.
  • Foldable Design- If you need to carry unistrut cutter in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most unistrut cutter features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all unistrut cutter cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. unistrut cutters actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut unistrut cutter. Each of these types of cuts can shape how you position yourunistrut cutter, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most unistrut cutter are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic unistrut cutter if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated unistrut cutter. Hydraulic unistrut cutter is especially helpful if you’re trying to cut through thicker locks.

Size

unistrut cutter are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small unistrut cutter

Small unistrut cutter that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of unistrut cutter, such as the outstanding Knipex Tools unistrut cutter, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized unistrut cutter

Medium-sized unistrut cutter range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large unistrut cutter

Large unistrut cutter that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most unistrut cutter are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The unistrut cutter may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini unistrut cutter or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier unistrut cutter offers more metal-crushing force, but it causes fatigue over time. A lightweight unistrut cutter is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

Questions and Answers

  • Which cutters are best for electricians, according to #1?

Ans: Depending on your line of work, you could need a cutter that meets specified requirements. For instance, unistrut cutters with a needle-nose are used by electricians. They have tapered jaws that make it simple for them to bend wires and insert them into panels that are too small for any other type of cutter or plier to fit.

How should I pick a cutter?
  • Ans: When selecting a cutter, there are a few things to consider. Consider, for instance, the blade’s ability to cut, the handles’ length and insulation, the material from which they are formed, etc. Different unistrut cutter are used for various tasks. Choose the option that will enable you to complete your assignment with the very minimum amount of effort.
3. What distinguishes cutters from strippers?
  • Ans: Contrary to what their names might imply, cutters focus primarily on cutting, whilst wire strippers assist in removing the insulation.
4. If I cut a cable wire, would I get electrocuted?
  • Ans: There is a chance of electrocution while cutting a cable wire. Wire cutters include handles with rubber insulation to absorb such unforeseen shocks to reduce this risk.
5. For what purpose do cutters have holes?
  • The wire cutters’ holes make it easier to use small bolts and screws. To achieve this, one must thread a bolt or screw the correct length into the appropriate-sized hole. When the handles are squeezed together, the bolt or screw will have a clean trim without any damage to the threads.
6. How are heavy-duty cuts?
  • Ans: Working a heavy-duty job can be demanding and difficult. You need a variety of heavy-duty wire cutters to successfully cut heavy-duty wires in order to ease the difficulty of this challenging work.

The following is a list of some safety advice you can use when cutting through heavy-duty wires.

  • To protect your eyes, you must use eye protection. This will shield you from any mishaps and stop dust, debris, and other flying objects from getting in your eyes.
  • To ensure that the contact between the wire and the cutter is stable, cut the wire at an angle. This will stop any slippage-related mishaps.
  • In order to prevent the unistrut cutter from flying off your palm and landing somewhere else, you must firmly grasp the handle.
  • The unistrut cutter needs to be constantly oiled and lubricated to stay in top shape and cut wires effectively.
  • We have compiled a list of the various unistrut cutters that are offered on the market. Every one of the products listed is specifically made for its assigned function and falls into a designated category.

Therefore, we have compiled a comprehensive list containing the aforementioned attributes to make the challenging decision of choosing the right unistrut cutter simple.

Leave a Comment