Which Is The Best Welding Cutter Today?

There are lots of different kinds of cutters out there for all sorts of different needs. While each can be the best cutter for a particular task, you need to make sure that you’re getting the one that matches your needs. But first, let’s talk about what a welding cutter actually is.

The market is saturated with cutters, both manual and electric. It can be quite overwhelming to choose an appropriate tool for any specific job, especially if you’re not a pro. For example, an amateur will certainly struggle when dealing with a small cutter. For that reason alone, cutting experts from all over the world take great care when choosing the right cutter.

Today, we have for you a selection of the best welding cutter tools that you can buy this year. And to make sure that you settle on just the right device, we’ve even included a handy buyers’ guide at the end.

List of 10 Best welding cutter: Tested by Experts

These are available in different sizes, shapes, and cutting capacities, which makes it a bit hard to figure out the best option. We suggest you consider the bottom key factors before investing in the welding cutter to grab the best one.

1. Deluxe MIG Welding Pliers, 8-Inch, Rounded & Flat Face Hammer,Fine & Coarse Files, Side Pull V-Notch, Retention Chain, Ergonomic Grip, PM12, Strong Hand Tools

Features :

  • Fine and coarse files
  • Flat and rounded hammer
  • V-notch for wire or nuts
  • Comfortable grip
  • Retention chain attaches to MIG Gun holders to prevent loss.

Additional Info :

Item Dimensions
Height 1
Width 4
Length 10
Weight 0.8

2. Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display

Features :

  • USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine.
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs.
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozzles, 2 x Electrodes, 1 x English manual.
  • QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.

Additional Info :

Color 3 in 1

3. Henf 4 Drawer Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart with Tank Storage & 2 Cable Hooks & Safety Chain,100 Lb Capacity

Features :

  • 【Durable Welding Cart】: Welding cart is constructed of premium steel, and it with satin black powder coated finish that is rust proof and wear proof for years of use! Heavy duty with a total load capacity of up to 100lb which is enough to hold your welders plus plasma cutter on the same welding cart,also accommodate gas bottle.
  • 【Welding Cart with 4 Drawers】: The welder cart featured with 4 drawers for storing your tools to be organized. The top shelf accommodates most welders and plasma cutters.And a spacious rear shelf with 2 safety chains to secure the gas cylinder.
  • 【360°Swivel Casters】: The smooth-rolling welding cart is easy to maneuver with two 360°swiveling front casters for flexibility in all directions and two molded rubber rear wheels to make sure the stability of moving especially with heavy loads!
  • 【A Practical Tool for Welding Work】: It’s a piece of must-have accessory for weldors,handymen and sculptors,perfect for transporting and storing most MIG,TIG,ARC welding machines,plasma cutter,gas cylinder,hoses,helmet and other welding accessories and supplies,and keep them organized in one place.Suitable for use in home garage,workshop,repair shop.
  • 【Fast Delivery】: This Plasma Cutter welding cart will be shipped from US directly within 3-7 days arriving in normal.

4. Hot Max WC100 Welding/Plasma Cutter Cart

Features :

  • All steel construction with durable finish
  • Fits most MIG and plasma machines
  • Handle doesn’t get in the way of leads
  • Extra storage tray for accessories and equipment
  • Includes safety chains for shielding gas tanks

5. LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown

Features :

  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2″ ; Max Severance Thickness: 3/4″; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
  • ★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).
  • ★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.

Additional Info :

Color Brown
Item Dimensions
Height 12.5
Width 8
Length 17
Weight 44.5

6. Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart 180 Lbs Weight Capacity with Tank Storage & 2 Cable Hooks & Safety Chain Plasma Cutting Equipment

Features :

  • 【Rugged Iron Construction】The sturdy and durable welding cart is all-iron construction with satin black powder coated finish that is rust proof and wear proof for years of use!Heavy duty with a total load capacity of up to 180lb which is enough to hold your welders plus plasma cutter on the same welding cart,also accommodate gas bottle,tidy up your work space,help you find your welding accessories and tools right away!Suitable for a quick welding job or a big project at home garage & workshop
  • 【3 Shelves for Easy Access and Storage】The welder cart featured with 3-level shelves that provides ample storage space to organize your welding tools and equipments,help you built a neat and ordered garage or workshop!Spacing between each shelf is convenient and easy to access whatever tools you need!The top shelf accommodates most welders and plasma cutters.The middle and bottom shelves allow storage of necessary welding accessories,such as welding helmet,welectric drill,welder wire,etc.
  • 【Cylinder Rack w/Safety Chain】The 3 tiers welder cart is equipped with a spacious rear shelf for storing shielding gas bottle up to 9.6in diameter,comes with an extended chain to keep tank securely in place,add more stability and safety!Cut out in rear to allow plasma cutter cable routing through the rear of the cart!Designed with 2 side heavy-duty hanging hooks for cable storage!Equipped with a tilted handle that is ergonomically designed for easy maneuverability around the workshop
  • 【360°Swivel Casters】The smooth-rolling welding cart is easy to maneuver with two 360°swiveling front casters for flexibility in all directions and two molded rubber rear wheels to make sure the stability of moving especially with heavy loads!The industrial service cart is fully measured 41.3″(L) x 14.6″(W) x 29.7″(H).The top shelf is approx. 21.4″(L) x 11.3″(W); The middle shelf is 15.3″(L) x 11.3″(W) x 5.6″(H);The bottom shelf is 17.7″(L) x 11.6″(W)x15.7″(H);The rear shelf is 9.6″(L) x 11.6″(W)
  • 【A Practical Tool for Welding Work】If you are seeking for a practical welding cart for convenience in welding task,this Reliancer professional welder cart is highly recommended for you!It’s a piece of must-have accessory for weldors,handymen and sculptors,perfect for transporting and storing most MIG,TIG,ARC welding machines,plasma cutter,gas cylinder,hoses,helmet and other welding accessories and supplies,and keep them organized in one place.Suitable for use in home garage,workshop,repair shop

7. PrimeWeld 3-in-1 50 Amp Plasma Cutter, 200 Amp TIG Welder and 200 Amp Stick Welder – Welding and Cutting Combo, Mobile Welding Machine, Portable Plasma Cutter, Multipurpose Welder and Cutter, CT-520D

Features :

  • MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2″ thick with the 50A plasma cutting function. The TIG and stick welding settings also work with a variety of metals. Features an 50Hz/60Hz input power frequency and 85% power efficiency.
  • VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.
  • UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The safe and user-friendly plasma cutter doesn’t use flammable constituents, reducing exposure to risks.
  • PORTABLE, RELIABLE UNIT: The multipurpose welder and plasma cutter weighs only 32lbs, making it a great portable option. It features a duty cycle of 60% at maximum amps on all processes. It also easily switches from DC TIG welder to DC stick welder.
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we’re committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.

Additional Info :

8. Mophorn TIG/MMA Plasma Cutter CT520D 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

Features :

  • Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component life.
  • Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 6 mm; the maximum cutting thickness: 10 mm.
  • Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD digital display is clear and easy to read. With this multi-function welding machine, you will save time and money when meeting different needs.
  • Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated and overload; it is protected against splashing water, with a protection level of IP21, which has good water resistance.
  • Compact and Portable: Lightweight 37 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.

Additional Info :

Item Dimensions
Weight 29

9. Spot Weld Cutter Set Double Sided 14 Pcs,3/8″ HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

Features :

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates.
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck.
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
  • ◆【Package Include】:1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8″ cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8″ Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover
  • ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!

Additional Info :

Item Dimensions
Height 0.2
Width 1
Length 2

10. Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown

Features :

  • ★ 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2″ ; Max Severance Thickness: 3/4″; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum;
  • ★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).
  • ★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.

Additional Info :

Color Brown
Item Dimensions
Height 11
Width 8
Length 17
Weight 33.1

However, selecting the right device from among the many available ones in the market is not an easy task. But with us by your side, you have nothing to worry about!

List of welding cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 Deluxe MIG Welding Pliers, 8-Inch, Rounded & Flat Face Hammer,Fine & Coarse Files, Side Pull...
9.2
9.2
9
2 Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional...
9.6
8.8
9.4
3 Welding Cart for TIG MIG Welder Plasma Cutter Gas Bottle Storage 3-Tier Shelves Blue
9.2
9
9.3
4 Spot Weld Cutter Set,13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement...
9.8
8.9
9.7
5 Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder...
9
9.3
8.8
6 LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding...
9.4
9.5
9.7
7 Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet...
9
8.9
9
8 Spot Weld Cutter with 4 Pilot Pins, EONLION Sheet Metal Hole Cutter, Punch Remover Panel Separator...
9
9.6
9.6
9 Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding...
9.8
9.5
9.8
10 Mophorn TIG/MMA Plasma Cutter CT520D 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A...
9.6
9.4
8.9

 

What to Consider When Choosing the Best welding cutter

The Best welding cutter saves time compared to the automatic cutter. They’re simple to use and produce faultless results. Not all manual welding cutterare effective. This section explains how to choose the best cutter.

Using the appropriate tool provides you with an advantage and makes it easier for you to complete your responsibilities. Each wire cutter has a unique feature that makes it appropriate for a certain project type. But every good wire cutter needs to have a few particular traits. When buying a wire cutter, be sure that it:

  • Multitask– It should enable you to carry out tasks in addition to cutting wire. You can avoid the inconvenience of needing to purchase numerous instruments for various activities in this way.
  • Material: To enable you to do your task with ease, your wire cutter should be manufactured of a durable material that meets safety regulations, such as nickel-chromium, pure stainless steel, etc.
  • Has rubber grips: This will lessen the potential of injury from electrical shocks or jerks and assist to prevent the possibility of your wire cutter slipping off your hand.

Material Cutters

“welding cutter” is a misnomer. Manual tools score and snap tiles rather than cut them. Small, pointed wheels scratch the tile’s surface, creating the perfect location for a clean snap.

Wheel material affects tool performance. Tungsten carbide-tipped wheels endure longer than steel wheels while scoring tiles. Even if you’re only cutting materials for one job, utilizing the same wheel ensures accuracy.

Cutter-Bed

welding cutter beds are also crucial. There are some specific characteristics that can improve the usability of your manual welding cutter.

welding cutter have central ridges. Best manual tile cutters have foam or rubber on either side of the ridge. This foam or rubber creates a nonslip surface that keeps tiles in place while scoring or snapping, improving accuracy and reducing waste.

Foam or rubber supports the tile while absorbing snapping pressure. Without giving, you couldn’t snap tiles cleanly.

Cutter base

You may not notice the characteristics and differences in the bases of different manuals welding cutter. Larger tiles benefit from rubber feet and foldable sidebars.

It’s hard to provide continuous downward pressure while scoring larger tiles. On flat surfaces, a tile cutter without rubber feet can skid. It’s irritating and superficial.

Folding base sidebars support wide tiles and give stability when scoring and snapping. Cutting a wide tile off to one side creates uneven leverage. Sidebars allow for a more accurate, less uncomfortable cut.

Horizontal and angle rulers

Many of the greatest manual welding cutter have built-in measurement instruments to speed up, improve, and maintain accuracy. These features allow repetitive cutting without measuring.

Best welding cutterhave built-in horizontal rulers for trimming tiles. Some rulers extend to measure tiles that overhang the base.

Angle guidelines are convenient and consistent. Once you know the angle to cut, locate and lock the adjustable guides. You can register the tile against the guide to score and snap accurately.

How To Replace welding cutter Blade?

Nearly every warehouse has a cutter, often known as a welding cutter. These knives, which have a short blade and a compact design, may easily cut open cardboard boxes and take off packaging tape and other shipping-related wrappings. Box cutters are frequently built of extremely durable plastic or metal due to the trauma they endure.

welding cutter are often viewed as disposable by warehouse workers. Workers in the warehouse will often start looking for a new one as soon as the blades begin to wear out. Fortunately, your organization doesn’t have to continually spend money on new box cutter purchases each week. Simply replacing the blade is a straightforward fix. The best thing, though? They frequently include bonuses!

Opening The welding cutter

Finding out how a box cutter opens is the first step in replacing the blade. In our example, we only need to remove one side screw with a Phillips head screwdriver. Simply take the top off after removing the screw to divide the knife in half.

Identifying Components

The actual number of parts in our welding cutter is just five. The handle, screw, blade, housing for the blade, and a pack of extra blades. We can remove the blade and blade housing from the knife after the blade has been opened.

When you get to this stage, be careful to pay attention to how the knife is positioned in the housing. Once you’ve taken note of this, you can remove the knife from the housing and properly dispose of it.

Replacing Blades

The spare blades are often contained in a little pack. They frequently arrive in sets of three to five. You should carefully take these blades out of the knife. To avoid getting sliced, locate the

extra blades in the welding cutter handle. Next, unwrap the blades and take one out of the box. Put the other blades back into the handle once the new one is out.

Next, insert the new blade into the housing in the same manner you did with the old one. This knife’s blades have a two-notch system that must be properly reinstalled into the housing. This gives the blade a wonderful, secure hold.

Putting The welding cutter Back Together

We should now begin putting the welding cutter back together. Reinstall the blade and housing in the handle, check that the extra blades are correctly placed, and then reattach the handle’s top to its base. Your welding cutter will then be in like-new condition when you tighten the screw back into place.

When reinstalling the screw, make sure you tighten it just enough to hold it in place. Overtightening the screw will compress the handle and impede the movement of the blades in the handle. To prevent this, tighten it and then test it by repeatedly opening and closing the welding cutter to ensure that it is at a comfortable resistance.

3 Features of a welding cutter

The following characteristics are necessary for a heavy-duty welding cutter. Don’t buy it if even one component is missing. If you choose a less expensive model made of plastic or with a snap-off blade, it is not worth it because you will wind up spending more money replacing it more frequently.

Finger notch and grip

A handle that is comfortable for your fingers will have a deep notch that will stop your finger from creeping up near the blade as you cut. To prevent your hand from slipping while squeezing through tight materials, it should also feature a secure and non-slip grip.

Metal body

Spend a little more money to purchase a tool with a metal body because welding cutter with a plastic body won’t be able to survive continuous use on the job site.

Easy blade change

Frequently, standard box cutters don’t have changeable blades and need a screwdriver to do so. When your welding cutter blade becomes dull, you can easily replace it using a thumbscrew or finger release instead of searching for a screwdriver. To ensure that you always have extra blades on hand for quick swaps, look for a welding cutter with a blade storage system.

Ergonomics

Ergonomics is a top consideration in our design process. We always look for new ways to make our tools more comfortable and easier to use. This helps cut down on fatigue and reduces overuse injuries. It’s also why several of our tools look different from anything else you’ve ever seen.

Tool-Free Blade Changes

When you need to change a blade, you don’t need another tool to get the job done. You change blades less frequently because our blades last longer, and you change them easily.

Leave a Comment