Best Yes Plasma Cutter Reviews 2022

These best yes plasma cutter enable you to cut items smoothly. Most of the products reviewed here are designed to use for multiple purposes.

A yes plasma cutter is a must-have powerful cutting tool that can be used for more than just cutting for both domestic and professional purposes.

This standard cutter is highly versatile, lightweight, and heavy-duty, have traditional wheels and ever-so-effective rocker blades.

All you need is to place the cutting material and then run the cutter on it. Thus, the applied cutting pressure on the sharpened blades will cut through the material.

Top 10 Best yes plasma cutter: Our Picks

1. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Features :

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Additional Info :

2. YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable plasma cutter machine with accessories

Features :

  • High-Frequency Cut: The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/8″@110V,5/16″@220V
  • Lightweight and Portable: It is convenient to do home DIY and general repairing work. Dimension: 14.8″(L)x 6.5″(W)x 12.0″(H). Weight: 11lb
  • Widely Applied IGBT Inverter: It adopts IGBT inverter technology, features with current control, high quality and stable performance, suitable to cut stainless steel, alloy steel, mild steel, copper, etc.
  • Dual Voltage:It allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter. Suitable home DIY and industrial projects.
  • Multi-protection in One Cutter: With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way.

Additional Info :

3. YESWELDER CUT-65DS 65A Non-Touch Pilot Arc Air Plasma Cutter Non High Frequency arc starting, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine, 5/8 Inch Clean Cut

Features :

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Non-High-Frequency arc starting: Reliable plasma arc initiation without high frequency,greatly reduces the electromagnetic interference caused by high frequency and high voltage discharge
  • Powerful Cutting Ability:10-65 A DC output, 5/8”ideal clean cut and 1”maximum severance cut under 220/240V, 60% Duty Cycle
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Additional Info :

4. Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)

Features :

  • 【Pilot Arc Function】This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
  • 【Dual-Voltage 110/220V】Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
  • 【Air Pressure & Air Compressor】The regulator and gauge are installed in front of the panel,you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
  • 【Post Time Function】With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
  • 【Cutting Thickness】The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

5. TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2″ Clean Cut

Features :

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2″ clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Portable: Auto-voltage adapts to 110 V – 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

6. HITBOX 50A Plasma Cutter Welder Combo – 4 in 1 110V/220V 200A HF Pulse TIG Welder – Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)

Features :

  • 【4-in-1 Plasma cutter/welder combo】110v/220v 10-50Amp Non touch pilot arc plasma cutter max ideal cut thickness: 1/2″ ; Max Severance Thickness: 3/4″; 200amp TIG Pulse Welding Equipment allows welding thinner metals and high heat conductive metals without burning through. 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current
  • 【Foot pedal remote control】Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern
  • 【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures
  • 【IGBT inverter & 2T 4T Function】: Hitbox CT520 inverter welder uses secondary inverter technology and pure square wave output, does not penetrate thin plate. Concentrated heat, strong reverse cleaning capacity, wide cleaning range, continuous arc. 2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T
  • 【BUY WITH CONFIDENCE】Backed by a 2-year warranty, we’re committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our based parts and customer service on USA is available 7 days a week

7. YESWELDER Digital MIG-205DS MIG Welder,200Amp 110/220V Dual Voltage, Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Multiprocess Welder

Features :

  • IGBT inverter technology, Full 30-205Amp(max) with digital display, reliable quality and stable performance.
  • Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses
  • The MIG-205DS is capable of true lift TIG(need buy extra tig lift torch,not included inside product) welding as well as stick welding ,The MIG-205DS is an intuitive synergically designed MIG/MAG/ Flux Core/ARC/Lift TIG welding machine
  • Safety, Automatic Protection Function for Over-current, Over-voltage and Over-heating

8. Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2″ Clean Cut

Features :

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are “LCS22” or “LCS33”. Please search “Lotos LCS22” or “Lotos LCS33”; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.

Additional Info :

Item Dimensions
Height 26
Width 13
Length 10
Weight 22.5

9. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features :

  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
  • ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • PAPST Advanced German Cooling System
  • Max Severance Thickness: 3/4″
  • Max Cut Thickness: 1/2″

Additional Info :

Color Brown
Item Dimensions
Height 12
Width 6
Length 15
Weight 19.4
Release Date 2017-11-25T00:00:01Z

10. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features :

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Additional Info :

Item Dimensions
Height 19
Width 11
Length 20

List of yes plasma cutter: Comparison Table

# Product Name Popularity Score Quality Score Sentiment Score Sales Volume
1 YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V...
9.3
8.9
9.2
2 YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable...
9.5
9.6
9.3
3 YESWELDER CUT-65DS 65A Non-Touch Pilot Arc Air Plasma Cutter Non High Frequency arc starting,...
9.1
8.9
9.2
4 YESWELDER 110 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
8.9
9.8
9.5
5 Plasma Cutter with Pilot Arc, 50A Plasma Cutting Machine Dual Voltage 110/220V Plasma Cutter...
9
9
8.9
6 YESWELDER Plasma Cutter Torch Consumables, 24 Pcs Cutting Torch Nozzles Tips Kit For SG-55 AG-60...
9.3
9.5
9.7
7 Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
9.1
9.6
9.6
8 FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High...
9.4
8.8
9.8
9 Pilot Arc Plasma Cutter, Cuwiny 50 Amp Dual Voltage 110/220v Non-Touch Pilot Inverter Air Plasma...
9.8
9.1
9.6
10 PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year...
9.4
9.1
8.9

How to Choose the Best yes plasma cutter?

To help you pick the best yes plasma cutter for your tasks, examine these very important aspects.

  • Comfortable Grips- The grip design is essential to the operation. You will be exerting a considerable amount of force, so you want to make sure you have something that is both comfortable in your hand and easy to hold onto. While it shouldn’t be a driving reason to consider a yes plasma cutter, it is something to prioritize during selection.
  • Foldable Design- If you need to carry yes plasma cutter in a tool bag, you might want to invest in a set designed with that in mind. This is especially true if you know you will need longer handles for an increased mechanical advantage. Again, this is not a standard design feature, so you will need to search specifically for sets that offer it.
  • Adjustable Blade- Most yes plasma cutter features an adjustable blade. With this adjustment, you can set the proper cutting depth to fine-tune performance. How this adjustment is made can vary, and it is something to pay careful attention to. You want to make sure that the mechanism is both easy to use and will provide reliable results.
  • Cutting Style or Angle- If you think all yes plasma cutter cut in exactly the same way, it’s time to take a close look at the ones you’re thinking about buying. yes plasma cutters actually have different cut styles, or angles, which creates different end results. You can choose from angled, shear, clipper, or center cut yes plasma cutter. Each of these types of cuts can shape how you position youryes plasma cutter, how much pressure is applied to one point, and how the jaws open.
  • Hydraulic or Hand-Powered- Most yes plasma cutter are powered by nothing but your own force applied via the handles. However, you can opt for a hydraulic yes plasma cutter if you’d like. In these tools, a motor powers the cutting blades via a hydraulic piston. That piston moves the blades with increased force — more force than you could likely create with hand- and handle-operated yes plasma cutter. Hydraulic yes plasma cutter is especially helpful if you’re trying to cut through thicker locks.

Size

yes plasma cutter are offered in a wide range of sizes: 8, 10, 12, 14, 18, 24, 30, 36, and 42-inches. The cutter size will affect its capacity to cut through a variety of materials and metal thicknesses.

Small yes plasma cutter

Small yes plasma cutter that size 8, 10-inch, 12-inch, or 14-inches in length are primarily meant to cut through thinner chains and pry off bolts that have a soft to medium hardness. These types of yes plasma cutter, such as the outstanding Knipex Tools yes plasma cutter, are also quite popular as they are sturdy, fit in tight, confined locations, and enable on-the-go versatility.

Medium Sized yes plasma cutter

Medium-sized yes plasma cutter range in size from 18-inches-24 -inches. They can be utilized with soft and medium-to-hard metals. As a medium bolt cutter has a long handle, it provides better leverage for cutting through bulky things such as padlocks and removing bolts.

Large yes plasma cutter

Large yes plasma cutter that measure 30-42-inches are suitable for cutting through medium-hard metal components such as thick steel chains, copper cable, steel rods, and large bolts and padlocks. These heavy-duty tools include super-strong steel jaws and longer handles that provide you with improved leverage and bolt-busting strength for particularly demanding work.

Sharpness

The cutter’s jaws and blade edge must be built of strong, sturdy, and hard steel for maximum cutting power.

Most yes plasma cutter are forged from chrome molybdenum or chrome vanadium steel. Both forms of steel are strong and durable. Powder-coated steel prevents rust and corrosion.

Rockwell Scale

Any knife or ax will have a Rockwell Hardness Scale-made blade. The Rockwell Scale’s HRC code indicates steel’s hardness and durability. Higher RHC means tougher steel.

Handles

Handles must offer the appropriate leverage to expand the jaws so they may grab and cut metal with less effort.

Ergonomic design reduces hand fatigue. The yes plasma cutter may feature thick molded plastic handles, like the Capri Tools CP40209 40209 8-inch Klinge Mini yes plasma cutter or rolling steel handles with cushioned non-slip rubber grips.

Weight

A heavier yes plasma cutter offers more metal-crushing force, but it causes fatigue over time. A lightweight yes plasma cutter is perfect for quick chores and everyday transport, but not for heavy-duty tasks. Consider the tasks you must complete. Keep a heavy and a lightweight bolt cutter in your toolbox.

Questions and Answers

  • Which cutters are best for electricians, according to #1?

Ans: Depending on your line of work, you could need a cutter that meets specified requirements. For instance, yes plasma cutters with a needle-nose are used by electricians. They have tapered jaws that make it simple for them to bend wires and insert them into panels that are too small for any other type of cutter or plier to fit.

How should I pick a cutter?
  • Ans: When selecting a cutter, there are a few things to consider. Consider, for instance, the blade’s ability to cut, the handles’ length and insulation, the material from which they are formed, etc. Different yes plasma cutter are used for various tasks. Choose the option that will enable you to complete your assignment with the very minimum amount of effort.
3. What distinguishes cutters from strippers?
  • Ans: Contrary to what their names might imply, cutters focus primarily on cutting, whilst wire strippers assist in removing the insulation.
4. If I cut a cable wire, would I get electrocuted?
  • Ans: There is a chance of electrocution while cutting a cable wire. Wire cutters include handles with rubber insulation to absorb such unforeseen shocks to reduce this risk.
5. For what purpose do cutters have holes?
  • The wire cutters’ holes make it easier to use small bolts and screws. To achieve this, one must thread a bolt or screw the correct length into the appropriate-sized hole. When the handles are squeezed together, the bolt or screw will have a clean trim without any damage to the threads.
6. How are heavy-duty cuts?
  • Ans: Working with heavy-duty jobcan be demanding and difficult. You need a variety of heavy-duty wire cutters to successfully cut heavy-duty wires in order to ease the difficulty of this challenging work.

The following is a list of some safety advice you can use when cutting through heavy-duty wires.

  • To protect your eyes, you must use eye protection. This will shield you from any mishaps and stop dust, debris, and other flying objects from getting in your eyes.
  • To ensure that the contact between the wire and the cutter is stable, cut the wire at an angle. This will stop any slippage-related mishaps.
  • In order to prevent the yes plasma cutter from flying off your palm and landing somewhere else, you must firmly grasp the handle.
  • The yes plasma cutter needs to be constantly oiled and lubricated to stay in top shape and cut wires effectively.
  • We have compiled a list of the various yes plasma cutters that are offered on the market. Every one of the products listed is specifically made for its assigned function and falls into a designated category.

Therefore, we have compiled a comprehensive list containing the aforementioned attributes to make the challenging decision of choosing the right yes plasma cutter simple.

Leave a Comment